« Prev | 1 2 3 4 5 6 | Next »

Nudge: Improving Decisions About Health, Wealth, and Happiness

Nudge: Improving Decisions About Health, Wealth, and Happiness

by Richard H. Thaler, Cass R. Sunstein, Published 02/2009
Competing Against Time : How Time-based Competition is Reshaping Global Markets

Competing Against Time : How Time-based Competition is Reshaping Global Markets

by Jr. George Stalk, Thomas M. Hout, Published 03/1990
Engineering Mechanics: Statics (12th Edition)

Engineering Mechanics: Statics (12th Edition)

by Russell C. Hibbeler, Published 01/2009
Human Dimension & Interior Space: A Source Book of Design Reference Standards

Human Dimension & Interior Space: A Source Book of Design Reference Standards

by Julius Panero, Martin Zelnik, Published 01/1979
Experiencing Architecture

Experiencing Architecture

by Steen Eiler Rasmussen, Published 03/1964
Complexity and Contradiction in Architecture

Complexity and Contradiction in Architecture

by Robert Venturi, Published 01/1977
Architecture: From Prehistory to Postmodernity, Reprint (2nd Edition)

Architecture: From Prehistory to Postmodernity, Reprint (2nd Edition)

by Marvin Trachtenberg, Isabelle Hyman, Published 01/2003
Realidades, Level 2 (English and Spanish Edition)

Realidades, Level 2 (English and Spanish Edition)

by Peggy Palo Boyles, Myriam Met, Richard S. Sayers, Carol Eubanks Wargin, Published 12/2004
Milling: A Complete Course (Workshop Practice)

Milling: A Complete Course (Workshop Practice)

by Harold Hall, Published 12/2004
CNC Programming Handbook, Third Edition

CNC Programming Handbook, Third Edition

by Peter Smid, Published 11/2007
Agile Estimating and Planning

Agile Estimating and Planning

by Mike Cohn, Published 11/2005
Cam Jansen: the Mystery of the Gold Coins #5

Cam Jansen: the Mystery of the Gold Coins #5

by David A. Adler, Published 07/2004
The Circuit Designer's Companion

The Circuit Designer's Companion

by Tim Williams, Published 01/2005
The Design of High-Efficiency Turbomachinery and Gas Turbines (2nd Edition)

The Design of High-Efficiency Turbomachinery and Gas Turbines (2nd Edition)

by David Gordon Wilson, Theodosios Korakianitis, Published 01/1998
Computer Architecture: A Quantitative Approach, 4th Edition

Computer Architecture: A Quantitative Approach, 4th Edition

by John L. Hennessy, David A. Patterson, Published 09/2006
Circuit Design and Simulation with VHDL (The MIT Press)

Circuit Design and Simulation with VHDL (The MIT Press)

by Volnei A. Pedroni, Published 09/2010
A Verilog HDL Primer, Third Edition

A Verilog HDL Primer, Third Edition

by J. Bhasker, Published 01/2005
The Nature and Aesthetics of Design

The Nature and Aesthetics of Design

by David Pye, Published 09/2007
Time-Saver Standards for Interior Design and Space Planning

Time-Saver Standards for Interior Design and Space Planning

by Joseph; Panero, Julius; Zelnik, Martin DeChiara, Published 01/2001
Combinatorial Optimization: Algorithms and Complexity (Dover Books on Computer Science)

Combinatorial Optimization: Algorithms and Complexity (Dover Books on Computer Science)

by Christos H. Papadimitriou, Kenneth Steiglitz, Published 01/1998
CATIA V5 Workbook Release 19

CATIA V5 Workbook Release 19

by Richard Cozzens, Published 08/2009
CNC Programming: Basics & Tutorial Textbook

CNC Programming: Basics & Tutorial Textbook

by Michael J Peterson, Published 06/2008
Vibration Simulation Using MATLAB and ANSYS

Vibration Simulation Using MATLAB and ANSYS

by Michael R. Hatch, Published 09/2000
Computer Graphics with OpenGL (3rd Edition)

Computer Graphics with OpenGL (3rd Edition)

by Donald D. Hearn, M. Pauline Baker, Published 09/2003
RF Circuit Design

RF Circuit Design

by Christopher Bowick, Published 11/2007
Understanding Digital Signal Processing (3rd Edition)

Understanding Digital Signal Processing (3rd Edition)

by Richard G. Lyons, Published 11/2010
Computational Geometry: Algorithms and Applications

Computational Geometry: Algorithms and Applications

by Mark de Berg, Otfried Cheong, Marc van Kreveld, Mark Overmars, Published 04/2008
Theory of Vibration with Applications (5th Edition)

Theory of Vibration with Applications (5th Edition)

by William T. Thomson, Marie Dillon Dahleh, Published 08/1997
Modeling and Simulation of Dynamic Systems

Modeling and Simulation of Dynamic Systems

by Robert L. Woods, Kent L. Lawrence, Published 03/1997
Construction Drawings and Details for Interiors: Basic Skills, 2nd Edition

Construction Drawings and Details for Interiors: Basic Skills, 2nd Edition

by Rosemary Kilmer, W. Otie Kilmer, Published 04/2009
Marks' Standard Handbook for Mechanical Engineers 11th Edition

Marks' Standard Handbook for Mechanical Engineers 11th Edition

by Eugene A. Avallone, Theodore Baumeister III, Ali M. Sadegh, Published 12/2006
Engineering Drawing And Design

Engineering Drawing And Design

by Cecil Jensen, Jay Helsel, Dennis Short, Published 08/2007
Applied Fluid Mechanics (6th Edition)

Applied Fluid Mechanics (6th Edition)

by Robert L. Mott, Published 07/2005
Statics and Strength of Materials

Statics and Strength of Materials

by Fa-Hwa Cheng Dr., Published 09/1996
Learning OpenCV: Computer Vision with the OpenCV Library

Learning OpenCV: Computer Vision with the OpenCV Library

by Gary Bradski, Adrian Kaehler, Published 10/2008
Expert CAD Management: The Complete Guide

Expert CAD Management: The Complete Guide

by Robert Green, Published 04/2007
Managing the Design Factory

Managing the Design Factory

by Donald G. Reinertsen, Published 10/1997
Buildings across Time: An Introduction to World Architecture

Buildings across Time: An Introduction to World Architecture

by Michael Fazio, Marian Moffett, Lawrence Wodehouse, Published 01/2008
Mechanical Vibrations (5th Edition)

Mechanical Vibrations (5th Edition)

by Singiresu S. Rao, Published 09/2010
CNC Control Setup for Milling and Turning

CNC Control Setup for Milling and Turning

by Peter Smid, Published 03/2010
Approximation Algorithms

Approximation Algorithms

by Vijay V. Vazirani, Published 03/2004
Mastercam Workbook (Version 9)

Mastercam Workbook (Version 9)

by Richard Cozzens, Published 12/2002
Modern Control Systems (12th Edition)

Modern Control Systems (12th Edition)

by Richard C. Dorf, Robert H. Bishop, Published 07/2010
Mechanical Engineering Design (McGraw-Hill Mechanical Engineering)

Mechanical Engineering Design (McGraw-Hill Mechanical Engineering)

by Jospeh E. Shigley, Joseph E. Shigley, Charles R. Mischke, Published 11/1988
Theory of Machines and Mechanisms

Theory of Machines and Mechanisms

by John Uicker, Gordon Pennock, Joseph Shigley, Published 02/2010
Engineering Materials: Properties and Selection (9th Edition)

Engineering Materials: Properties and Selection (9th Edition)

by Kenneth G. Budinski, Michael K. Budinski, Published 02/2009
Schaum's Outline of Finite Element Analysis

Schaum's Outline of Finite Element Analysis

by George R. Buchanan, Published 11/1994
Engineering Formulas

Engineering Formulas

by Kurt Gieck, Reiner Gieck, Published 06/2006
Machinists' Ready Reference

Machinists' Ready Reference

by C. Weingartner, Jim Effner, Published 02/2001
Technical Drawing (12th Edition)

Technical Drawing (12th Edition)

by Frederick E. Giesecke, Alva Mitchell, Henry C. Spencer, Ivan Leroy Hill, John Thomas Dygdon, James E. Novak, Published 08/2002
Introduction to Mechatronics and Measurement Systems (Engineering Series)

Introduction to Mechatronics and Measurement Systems (Engineering Series)

by David G. Alciatore, Michael B. Histand, Published 11/2005
Developing Products in Half the Time: New Rules, New Tools, 2nd Edition

Developing Products in Half the Time: New Rules, New Tools, 2nd Edition

by Preston G. Smith, Donald G. Reinertsen, Published 10/1997
Manufacturing Engineering and Technology

Manufacturing Engineering and Technology

by Serope Kalpakjian, Steven Schmid, Published 04/2009
Introduction to CATIA V5 Release 19

Introduction to CATIA V5 Release 19

by Kirstie Plantenberg, Published 08/2009
Learning Python, 3rd Edition

Learning Python, 3rd Edition

by Mark Lutz, Published 11/2007
Architectural Graphics

Architectural Graphics

by Francis D. K. Ching, Published 06/2002
Vector Mechanics for Engineers: Statics

Vector Mechanics for Engineers: Statics

by Ferdinand Beer, Jr., E. Russell Johnston, Elliot Eisenberg, David Mazurek, Published 01/2009
Design of Machinery with Student Resource DVD

Design of Machinery with Student Resource DVD

by Robert Norton, Published 07/2007
Machine Elements in Mechanical Design (4th Edition)

Machine Elements in Mechanical Design (4th Edition)

by Robert L. Mott, Published 07/2003
CNC Programming Handbook

CNC Programming Handbook

by Peter Smid, Published 01/2003
Mechanical Drawing: Board and CAD Techniques, Student Edition

Mechanical Drawing: Board and CAD Techniques, Student Edition

by Thomas French, Jay Helsel, Published 02/2002
Space Planning Basics

Space Planning Basics

by Mark Karlen, Published 05/2009
Making Mechanical Cards: 25 Paper-Engineered Designs

Making Mechanical Cards: 25 Paper-Engineered Designs

by Sheila Sturrock, Published 10/2009
Optimization in Operations Research

Optimization in Operations Research

by Ronald L. Rardin, Published 08/1997
Mechanical Engineering Design

Mechanical Engineering Design

by Joseph Shigley, Charles Mischke, Richard Budynas, Joseph Shigley, Charles Mischke, Richard Budynas, Published 07/2003
CMOS VLSI Design: A Circuits and Systems Perspective (3rd Edition)

CMOS VLSI Design: A Circuits and Systems Perspective (3rd Edition)

by Neil Weste, David Harris, Published 05/2004
TURBOCAD Guide to Learning CAD (Version 4)

TURBOCAD Guide to Learning CAD (Version 4)

by Randall Newton, Published 01/1997
Illustrated Sourcebook of Mechanical Components

Illustrated Sourcebook of Mechanical Components

by Robert O. Parmley, Published 05/2000
Programming of CNC Machines

Programming of CNC Machines

by Ken Evans, Published 04/2007
The Structural Basis of Architecture

The Structural Basis of Architecture

by Bjørn N. Sandaker, Arne P. Eggen, Mark R. Cruvellier, Published 02/2011
Mechanical Vibrations (4th Edition)

Mechanical Vibrations (4th Edition)

by Singiresu S. Rao, Published 04/2003
Pro/ENGINEER Tutorial Wildfire 4.0 and MultiMedia CD

Pro/ENGINEER Tutorial Wildfire 4.0 and MultiMedia CD

by Roger Toogood, Published 12/2007
Photoshop for 3D Artists, Vol. 1

Photoshop for 3D Artists, Vol. 1

by Andrzej Sykut, Fabio M. Ragonha, Zoltan Korcsok, Richard Tilbury, Published 06/2011
Interpreting Engineering Drawings (Drafting and Design)

Interpreting Engineering Drawings (Drafting and Design)

by Cecil H. Jensen, Jay D. Helsel, Published 09/2006
Python Cookbook

Python Cookbook

by Alex Martelli, Anna Ravenscroft, David Ascher, Published 03/2005
Systems Engineering and Analysis (3rd Edition)

Systems Engineering and Analysis (3rd Edition)

by Benjamin S. Blanchard, Wolter J. Fabrycky, Published 01/1998
Introduction To Industrial And Systems Engineering (3rd Edition)

Introduction To Industrial And Systems Engineering (3rd Edition)

by Wayne C. Turner, Joe H. Mize, Kenneth E. Case, John W. Nazemtz, Published 08/1992
Introduction to Formal Hardware Verification

Introduction to Formal Hardware Verification

by Thomas Kropf, Published 11/1999
Construction Planning, Equipment, and Methods (McGraw-Hill Series In Civil Engineering)

Construction Planning, Equipment, and Methods (McGraw-Hill Series In Civil Engineering)

by Robert Peurifoy, Clifford J. Schexnayder, Aviad Shapira, Published 06/2005

« Prev | 1 2 3 4 5 6 | Next »
Featured Video
Editorial
Jobs
Modeling and Simulation / HWIL Engineer for Lockheed Martin at Orlando, Florida
QA Engineer- F-35 Quality Engineering for Lockheed Martin at Forth Worth, Texas
Engineer A, B or C (Transportation) for City of Austin at Austin, Texas
Structural Engineer for Design Everest at San Francisco,, California
Geographic Information System Specialist for U. S. Dept. of the Interior at Washington, District Of Columbia
Senior Operations Environmental Analyst for EDP renewables at Houston, Texas
Upcoming Events
EMO Hannover 2019 at Hannover Germany - Sep 16 - 21, 2019
WESTEC 2019 at Long Beach Convention & Entertainment Center 300 East Ocean Boulevard Long Beach CA - Sep 24 - 26, 2019
3D Collaboration & Interoperability Congress - 2019 at American Mountaineering Center Golden CO - Oct 8 - 10, 2019
The Motion + Power Technology Expo at Detroit MI - Oct 15 - 17, 2019
Kenesto: 30 day trial



Internet Business Systems © 2019 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise