TopSolid - Newsletter #64


TopSolid'Newsletter #64


11th International TopSolid Seminar

Missler Software recently held its 11th International TopSolid seminar in Cannes, in the South of France. The annual TopSolid seminar took place from January 18-22 and marked the 2012 kick-off for French internal teams and international TopSolid resellers. More than 200 participants from over 35 countries participated in the event which focused essentially on the new TopSolid 2012 versions.

Both internal and international sales team had the opportunity to discover the new 2012 versions and the roadmap for future versions during the plenary session and break-out sessions organised throughout the seminar.

The busy agenda also included fun time with a sailing regatta in the Bay of Cannes, a 2 CV visit of Cannes' close-by picturesque villages and a minibus visit of historical villages.

The seminar concluded with a gala award ceremony where the most successful French and international Sales Teams were rewarded.


More than 200 participants from the TopSolid community attended the TopSolid International Seminar in Cannes from 18-22 January.

A successful 2011 for Missler Software

Missler Software is pleased to announce successful 2011 end of year results with an increase in sales turnover of 6%. Despite a somewhat difficult global economic context the company has increased its turnover both in France and on international markets.

The French market performed particularly well with an increase in the region of 10% compared to 2010 results. The main champions of this growth were the Cam, ERP and TopSolid'Design 7 products. Cam sales increased by 40% in France showing a new confidence on the part of French manufacturing and sub-contracting companies.

Missler Software announced a continued strong sales performance in its 2 leading international markets outside France: Japan and Germany. In fact turnover in the German-speaking market has increased fivefold over the past 10 years.

2012 is set to be another strong year for TopSolid. Thanks to the new TopSolid 7 software generation which is completely based on new software development technology, Missler Software promises its customers productivity gains in the region of 20 to 30%. TopSolid will continue in 2012 to address the manufacturing market by providing integrated CAD/CAM software for the mechanical engineering, sheet metal and wood industries.

Discover TopSolid on a trade fair close to you this year.

TopSolid'Wood 2012

TopSolid'Wood 2012 will be launched in April but will be available for demonstration at the upcoming Expobois trade fair which will take place in Paris from 08 to 11 February. Many new improvements are available in this version such as:

  • Improved part and panel definition
  • New functions for your components
  • More efficient design functions
  • More precise draft generation
  • Increased machining functions

Discover the rest of what's new in the integrated CAD/CAM TopSolid’Wood 2012 solution here.

Discover the new functionalities in TopSolid'Wood 2012.

New TopSolid'Design 7 tutorial

As announced in previous newsletters we will publish this month and over the coming months a new video per newsletter to accompany the new TopSolid'Design 7 tutorial available on the TopSolid 7 mini web site. The third video shows you how to quickly and easily design a vice with TopSolid'Design 7.

The TopSolid'Design 7 tutorial will be automatically available within TopSolid 7 in the coming months. The goal of this tutorial is to teach you the very basics of working with TopSolid 7. It has been written with the key focus of getting a new user running as quickly as possible within the TopSolid 7 environment.  

Click here to download the 3rd video dedicated to the assembly of the vice.

Discover the 3rd TopSolid'Design 7 video to help you get the most out of the software.

Customer of the month: Verhofsté

The company Verhofsté based in Zele, Belgium has been using software for the commercial and technical design of its steel shelters since 2006. Its €60,000 investment to replace the old AutoCad software with TopSolid has greatly accelerated development of the company’s made-to-measure products. It now only takes a few minutes to design a new shelter. This new method is also set to boost sales.
In the past all new models had to be completely re-drawn, and the new dimensions entered. It took several hours to design a new model in this way. So Filip Verhofsté went looking for a solution. "What we needed was an easy-to-use software package, that didn’t require much training. Above all, the tool we were looking for had to make it possible to quickly deliver customer proposals along with a fully technical drawing. Thanks to the new TopSolid software, it now only takes a few minutes to design a new shelter. We consulted Luc Cornelis from 4D Services in Ternat as part of the process."

Click here for the rest of the report.

"Designing a new shelter now only takes a matter of minutes thanks to TopSolid."

Hint of the month: TopSolid'Design

How to save time with TopSolid'Design 7

You need to copy an existing assembly and just make a couple of small changes to some parts. It is therefore very useful to be able to copy all documents concerning the assembly in question. The Copy/Paste Special function enables you to easily copy all documents linked to your assembly.

  1. Copy the documents
  2. Special paste in the same or another project
  3. Select the parts to be copied: in this case the plate and the manifold
  4. Carry out the desired changes to the 2 parts from the assembly 
  5. Your work is over

Click on thumbnail to watch video.

Upcoming events with Missler Software

Show Dates Location Booth - Exhibitor
METAPRO Event From 01/02/2012 to 02/02/2012 Kortrijk/Courtrai Belgium G26 - 3D Ultra Surfaces
MotorSport Expotech From 02/02/2012 to 03/02/2012 MODENA Italy - Missler Software Italia S.R.L.
Expobois From 08/02/2012 to 11/02/2012 Villepinte France Hall 7 Stand B 023 - Missler Software
METAV From 28/02/2012 to 03/03/2012 Düsseldorf Germany Hall 13, Stand B98 - Missler Software
Techni-Show From 13/03/2012 to 16/03/2012 Utrecht Netherlands Techni-Show - Bemet International B.V.
Techni-Show 2012 From 13/03/2012 to 16/03/2012 Jaarbeurs, Ultrecht Netherlands 11.C038 - Bemet International B.V.
Holz-Handwerk From 21/03/2012 to 24/03/2012 Nürnberg Germany Halle 11.1 Stand 167 - Missler Software
Industrie 2012 From 26/03/2012 to 30/03/2012 Villepinte France Hall 5A Stand K69 - Missler Software
Eurostampi - Mec Spe 2012 From 29/03/2012 to 31/03/2012 Parma Italy - Missler Software Italia S.R.L.

© Copyright Missler Software 2012. All Rights Reserved.
All product names or brands are registered trademarks of their respective owners.

Missler Software - 7, rue du Bois Sauvage - 91055 Evry, France.
Tel: +33(0) - E-mail: Email Contact .


Review Article Be the first to review this article
SolidCAM - See For Yourself

Featured Video
Failure Analysis Engineer for Flextronics at Milpitas, California
Mechanical Engineer for Flextronics at Milpitas, California
Geodesign Manager for Design Workshop at Aspen, Colorado
Upcoming Events
DEVELOP 3D Live 2020 New Date November 3rd at Sheffield University ctagon and INOX Building, Durham Road Sheffield United Kingdom - Nov 3, 2020
Digital Twin 2020 - Now in November 2020 at Melbourne FL - Nov 4 - 5, 2020
Sensors Expo & Conference at McEnery Convention Center SAN JOSE CA - Nov 16 - 18, 2020
3D Collaboration & Interoperability Congress at Golden CO - Feb 20 - 24, 2021
Kenesto: 30 day trial

© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise