Elbit Systems Deploys Aldec DO-254/CTS and Passes EASA Verification Audit for Level A System

HENDERSON, Nev. — (BUSINESS WIRE) — June 16, 2014Aldec, Inc. announces that Elbit Systems, Ltd. has successfully passed a critical verification audit by the European Aviation Safety Agency (EASA) with Aldec’s DO-254/CTS™ as the primary FPGA physical testing platform.

Elbit’s project consisted of multiple FPGAs from different types in which each FPGA consisted of multiple clock domains and high speed interfaces to PCI, ARINC and LVDS. Elbit verified FPGA pin-level requirements using DO-254/CTS custom boards and verified board level requirements using their target board. By deploying Aldec’s DO-254/CTS in their verification flow, Elbit increased functional verification coverage by test and reduced the overall verification cycle. EASA supported Elbit’s FPGA testing approach facilitated by Aldec’s DO-254/CTS.

“EASA approved our verification process based on Aldec DO-254/CTS, accepted our test results and the audit passed without any findings,” said Moshe Porian, Logic Design Verification Group Leader at Elbit Systems Aerospace Division. “This is the first time in Elbit’s history that we have been able to bring more than five FPGA devices to the audit. Aldec helped us solve several of our verification challenges, and delivered quick and professional responses for all our requests.”

“FPGA requirements-based testing is critical to DO-254 compliance, but in most cases not feasible to do in the target board due to the lack of FPGA input control and output access points - this created major challenges for Elbit,” said Louie De Luna, DO-254 Program Manager at Aldec. “DO-254/CTS solved Elbit’s major challenges and they were able to test in hardware 100% of FPGA pin-level requirements. As opposed to developing software test vectors, Elbit used their simulation testbench as test vectors for FPGA at-speed testing which cut their development costs.”

“Elbit needed to implement robustness testing for their design assurance level (DAL) A FPGAs. By executing the simulation environment in hardware using DO-254/CTS boards, Elbit was able to catch bugs which gave them verification credits for robustness,” said Zibi Zalewski, General Manager of Aldec’s Hardware Products Division. “Additionally, we also provided testing capabilities for abnormal operating conditions with input voltage and clock frequency variations that are all fully scriptable. This enabled automated testing of all FPGA requirements after each change of code, including advanced results comparison functions.”

About DO-254/CTS™

DO-254/CTS is a fully customized hardware and software platform that augments target board testing to increase verification coverage by test and satisfy the verification objectives of DO-254/ED-80. The target design runs at-speed in the target device mounted on the custom daughter board. The simulation testbench is used as test vectors to enable requirements-based testing with 100% FPGA pin-level controllability and visibility necessary to implement normal range and abnormal range tests. The FPGA testing results are captured at-speed and displayed using a simulator waveform viewer for advanced analysis and documentation. For more information, go to www.aldec.com/do254.

About Aldec

Aldec Inc., headquartered in Henderson, Nevada, is a 30-year industry leader in Electronic Design Verification and offers a patented technology suite including: RTL Design, RTL Simulators, Hardware-Assisted Verification, Design Rule Checking, IP Cores, Requirements Management, DO-254 Functional Verification and Military/Aerospace solutions. www.aldec.com

Aldec is a registered trademark of Aldec, Inc. All other trademarks or registered trademarks are property of their respective owners.



Contact:

Aldec, Inc.
Christina Toole, +1-702-990-4400
Email Contact




Review Article Be the first to review this article
Featured Video
Editorial
Latest Blog Posts
Roberto FrazzoliMCADCafe Editorial
by Roberto Frazzoli
A closer look at CCE’s EnSuite – Cloud ReVue LiveLink
Jobs
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
GIS Specialist for Schneider Geospatial at Indianapolis, Indiana
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
Assistant Professor in Applied GIS for University of San Diego at San Diego, California
Senior Highway Engineer for RS&H at Jacksonville, Florida
Upcoming Events
Canadian Manufacturing Technology Show 2021 at The International Centre (Hall 2) 6900 Airport Road Mississauga, Ontario L4V 1E8 Canada - Oct 4 - 7, 2021
Houstex 2021 at George R. Brown Convention Center Houston TX - Oct 5 - 7, 2021
Autodesk University 2021 | Free digital conference at United States - Oct 5 - 14, 2021
HxGN Live Design & Engineering 2021 - Virtual at United Kingdom - Oct 12 - 14, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise