CAN FD Bus Controller IP Core with ISO and non-ISO Compliance Available Now from CAST

First CAN FD IP core for ASICs and FPGAs now supports both CAN FD standards after rigorous transceiver chip testing at CAN Open Plug Fest

Woodcliff Lake, NJ — May 15, 2015 — A new version of the CAN 2.0 and FD Bus Controller Core that supports both the current non-ISO and upcoming ISO specifications is now available from intellectual property provider CAST, Inc.

The first CAN Flexible Data soft IP core for ASICs and FPGAs on the market (in January 2014), the controller core is also believed to be the first soft core to undergo testing at a CAN Open Plug Fest (in March 2015) and the first to support both Bosch’s original CAN-FD specification as well as the ISO version of the CAN FD specification expected to be ratified later this year. CAST sources the core from partner Fraunhofer IPMS; early transceiver chips developed by customer ON Semiconductor were used in the Plug Fest.

“The FD version of the CAN bus is rapidly replacing other technologies in automobile and other systems, and several CAST customers have already gotten a jump on their competition by using this early controller core,” said Nikos Zervas, chief operating officer for CAST. “We’ve now put the core through the torture test of a Plug Fest and also added support for the ISO version, and we believe this to be the easiest, least-risky, and most cost-effective way for designers to integrate CAN FD in a wide variety of systems and products.”

The evolution of the CAN FD specification has been an interesting process. It passed a first ISO ballot in the Summer of 2014. As designers began using it, weaknesses in its data link protocol were detected, and fixed. The changes have little impact on most early design work, but do require a new spec. As Holger Zeltwanger, CiA managing director of trade group CAN in Automation said: “The year of 2014 was somehow challenging for the CAN FD community. But it is better to detect problems before the serial production has started.”

It is expected that the corrected, “ISO” standard 11898-1 will be approved later this year.

The new version of the CAN 2.0 and FD Bus Controller Core already conforms to the ISO standard —and to the base CAN 2.0A & 2.0B (ISO 11898) and non-ISO FD protocol—and is available today in synthesizable RTL for ASICs or optimized netlists for FPGAs. A ready-to-run Talos™ CAN FD Reference Design Board and other development aids are also available from CAST.

Learn more about Fraunhofer IPMS at www.ipms.fraunhofer.de. See ON Semiconductor’s existing line of CAN Transceivers and hundreds of other proven, cost- and energy-efficient electronics solutions at www.onsemi.com.

About CAST

CAST is a twenty-year-old developer, integrator, and aggregator of IP cores for ASICs and FPGAs. The company offers some of the best available choices for low-power, high-value IP, including 8051s and BA2x 32-bit Processors; video, image, and data compression; security, interfaces and other functions needed for complete system on chip designs. Visit www.cast-inc.com, or follow @castcores on Twitter.


                                                                    # # #

Talos is a trademark of CAST, Inc. All other trademarks are the property of their respective owners. 



Read the complete story ...


Review Article Be the first to review this article
Featured Video
Editorial
Latest Blog Posts
Jobs
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Assistant Professor in Applied GIS for University of San Diego at San Diego, California
Senior Highway Engineer for RS&H at Jacksonville, Florida
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
GIS Specialist for Schneider Geospatial at Indianapolis, Indiana
Upcoming Events
Canadian Manufacturing Technology Show 2021 at The International Centre (Hall 2) 6900 Airport Road Mississauga, Ontario L4V 1E8 Canada - Oct 4 - 7, 2021
Houstex 2021 at George R. Brown Convention Center Houston TX - Oct 5 - 7, 2021
Autodesk University 2021 | Free digital conference at United States - Oct 5 - 14, 2021
HxGN Live Design & Engineering 2021 - Virtual at United Kingdom - Oct 12 - 14, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise