Democratization of CFD Education, Truly!!

LearnCAx joined Massive Online Open Course (MOOC) on 23rd April 2015. In just 1 month, with 1786 course subscription total 2,57,334 minutes of learning is done by students across the globe. By distributing course worth 0.7 million USD for FREE, LearnCAx platform is marching towards becoming biggest MOOC platform for CFD education.

Computational Fluid Dynamics (CFD) is always been looked at as a complex technology to learn. There are many platforms available to acquire knowledge of subject fundamentals like fluid mechanics, heat transfer and CFD basics, but when it comes to acquiring required software skill sets, there are very few effective platforms.

The 3A's for True Democratization of Education

Availability of CFD knowledge has seen many paradigm shifts. During very early phase of CFD, it was used as a research tools and knowledge was available and accessible to very few. Thanks to industrialization of CFD usage and its spread, CFD skill is now considered as one of the “must have” skill for engineers rather than “good to have” skill. The availability of career opportunities has flourished many institutes and training centers across the globe which offers CFD training. This has made CFD knowledge available to many engineers.

There are still two main barriers that needs to be addressed for “True democratization of CFD education”. Accessibility and Affordability. Traditional brick-and-mortar (classroom) training puts a limitation on its accessibility. Students and professionals close the institute can make it. This also puts limitation on when one can go for training and forces students to go for acquiring such skill sets after their academics due to physical location of such training hubs. The second and in my opinion the biggest issue is affordability. The average cost of any professional CFD course is in the range of 400 to 600 USD. In few cases, the cost goes as high as 2000 USD. This is lot of money for one who is in academics and definitely becomes a deciding factor for many who are looking to acquired CFD knowledge.

So in true sense, if we want to democratize CFD education, it should satisfy 3 A’s. It should be easily Accessible, should be Affordable and should be always Available in the form where one can learn at their comfort.

LearnCAx and the 3A’s

Since the inception of LearnCAx in Feb 2011, its main motive is to inspire, educate and mentor engineers globally. Since 2006 to 2011, CCTech (parent company of LearnCAx) offered conventional classroom training which was taken by more than 800 students. But this was still a very small number as compared to number of students looking for such training. To address the accessibility and availability issue, in 2011, CCTech decided to convert all its knowledge hub in set of industry oriented online CFD courses and launched it under education brand "LearnCAx". This made CFD education accessible across the globe and available 24x7 for students. The course reach and enrollment increased, but still was limited to those who could afford it.

On 23rd April 2015, LearnCAx joined Massive Online Open Course (MOOC) and made all its courses FREE. This was a huge step in the way CFD education is imparted to students. The step was taken to make sure that CFD education becomes affordable to each and every individual interested to acquire CFD software skill sets and get ready for CFD career. 

Following the right path

The results of last one month are prodigious. In just 1 month, LearnCAx received 1786 course subscriptions from 80 different countries and distributed 0.7 million USD worth courses for FREE. Following is the statistical data from 1st May 2015 to 31st May 2015.

  • 1786 course subscribers
  • Subscribers from 80 countries
  • 2,57,334 minutes of learning
  • 318 enrolments for most popular course

Courses based on ANSYS software has received highest number of enrollments. Course on STAR CCM+ has seen exponential growth with more than 100 enrollments in a month. Students have also shown great interest in learning fundamentals subjects like aerodynamics and basics of CFD. 

CFD course subscriptions from 1st May 2015 to 31st May 2015

The courses are well received by both students and working professionals. Following is the list of few institutes and industries. (The data is based on google analytics network data from 1st May 2015 to 31st May 2015) 

Universities and Institutes

  • Massachusetts institute of technology
  • Imperial college London
  • University of Cambridge
  • University of Michigan
  • The university of Manchester
  • The university of Melbourne
  • Hong Kong university of science and technology
  • University of Glasgow
  • University of Sheffield
  • Indian Institute of Technology
  • Indian Institute of Science, Banglore
  • National Institute of Technology
  • Chalmers University of Technology
  • University of Pittsburgh
  • Purdue university


  • National Aeronautics and Space Administration (NASA)
  • Dassault systems India
  • Ford motor company
  • General motors corporation
  • ANSYS Inc.
  • CD-adapco India
  • Eaton corporation
  • Siemens corporation
  • Jaguar land rover
  • The Boeing company
  • Honeywell Inc.
  • Infosys

This is the first milestone and there still lot to be done. LearnCAx plans to bring more software courses under single learning platform. This education platform needs to be supported by both student community and software providers. To make student’s learning really effective, software companies’ needs to come forward to provide easy software access to students as well as course creators.

Know-how barrier is considered as biggest hurdle in CFD field for very long time. LearnCAx is making its best efforts to break this barrier and make CFD knowledge accessible, available and affordable to each and every engineer across the globe.

Read the complete story ...

Review Article Be the first to review this article
Featured Video
Latest Blog Posts
Industry ExpertsMCADCafe Editorial
by Industry Experts
MCADCafe Industry Predictions for 2022 – ProShop
Industry ExpertsMCADCafe Editorial
by Industry Experts
MCADCafe Industry Predictions for 2022 – Oqton
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
GIS Specialist for City of Ithaca at ithaca, New York
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
Mid-Level Landscape Architect/Designer for Studio-MLA at Los Angeles, California
Upcoming Events
3DEXPERIENCE World 2022 at Georgia World Congress Center Atlanta GA - Feb 6 - 9, 2022
3D Collaboration & Interoperability Congress at Golden CO - Feb 21 - 24, 2022
Additive Manufacturing Users Group AMUG 2022 at Chicago IL - Apr 3 - 7, 2022
Additive Manufacturing Users Group Education & Training Conference at Hilton Chicago Chicago IL - Apr 3 - 7, 2022

© 2022 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise