Connections for ASSET’s SourcePoint software debugger simplified to USB3 for Intel systems with DCI

Most portable systems do not have the board space to accommodate the much larger 60-pin XDP or MIPI connectors

Apr 13, 2016 -- A new system controller for ASSET® InterTech’s SourcePoint™ hardware-assisted software debug platform allows engineers to begin software debug immediately by offering a fast and easy way to connect SourcePoint to Intel®-based target platforms that support Direct Connect Interface (DCI).

The new system controller, called the Closed Chassis Controller (CCC), features USB3 connectivity rather than Intel’s legacy 60-pin XDP connector or a MIPI60 connector. Many portable systems like laptops or tablets do not have the board space available for the much larger XDP or MIPI connectors and yet they still require connectivity to a debugger. All three of the Intel connectivity options for hardware-assisted software debuggers rely on the IEEE 1149.1 JTAG standard. The XDP and MIPI60 connectors implement the JTAG interface in hardware while the USB3 interface will make use of DCI and incorporate the JTAG protocols as a sideband.  

“The software engineer can only start debugging the system’s software and firmware after SourcePoint is connected to the target platform and more and more systems today just don’t have the space for a 60-pin XDP or MIPI connector,” said Larry Osborn, ASSET’s product manager for SourcePoint. “This is a particular problem for many embedded applications, such as nodes in an Internet of Things (IoT), because these nodes are often very small devices. With the CCC and because of the popularity of USB connectivity, there should be no delay as long as the Intel platform supports DCI. Just hook up the SourcePoint and start debugging.”

As a system controller, the CCC also provides connectivity to Ethernet networks and the Internet cloud. As a result, developers can remotely access a target platform connected to a CCC. This would allow a geographically dispersed development team to collaborate while debugging a target platform’s firmware or software.

ASSET’s SourcePoint is a platform of debug and trace tools for C/C++ embedded software and firmware. The CCC system controller and SourcePoint platform have been optimized for Intel Core™, Atom™ and Xeon® processors. The CCC supports a number of common use cases, including initial cold boot, suspend state-operations and survival, and reset sequences.

Availability

The CCC controller for SourcePoint is available now from ASSET InterTech and its distributors. The SourcePoint debugger is sold separately. For product information, call 888-694-6250, fax 972-437-2826, e-mail Email Contact or visit www.asset-intertech.com.

About ASSET InterTech

ASSET InterTech ( www.asset-intertech.com) is a leading supplier of tools to debug, validate and test software and hardware. The company’s SourcePoint™ software debug and trace platform and ScanWorks® platform for embedded instruments work in tandem to give engineers real insight from code to silicon. SourcePoint is a best-in-class, powerful debugger that includes advanced trace tools to gather data from code and quickly debug complex embedded software systems. ScanWorks controls instruments embedded in chips to test and validate chips and circuit boards. Together they empower engineers with tools and technology for the entire life-cycle of a system, beginning with software and hardware development, continuing through design validation and software/hardware integration, and eventually supporting the testing of the product in manufacturing and field service. ASSET InterTech is located at 2201 North Central Expressway, Suite 105, Richardson, TX 75080.

Follow us on:

Facebook:        https://www.facebook.com/ASSETInterTech

LinkedIn:        http://www.linkedin.com/company/asset-intertech-inc.

Twitter:           https://twitter.com/ASSETInterTech

You Tube:       http://www.youtube.com/ASSETInterTech

Our blog – Test Data Out:      http://blog.asset-intertech.com/

 

########

 

 



Read the complete story ...


Review Article Be the first to review this article
Featured Video
Editorial
Latest Blog Posts
Industry ExpertsMCADCafe Editorial
by Industry Experts
MCADCafe Industry Predictions for 2022 – Xometry
Jobs
Fluid Dynamic Engineer / CFD Developer for Azore CFD Software at Livonia, Michigan
Engineering / Software Sales Representative for Azore CFD Software at Livonia, Michigan
GIS Analyst for New Mexico Gas Company, Inc. at Albuquerque -New Mexico, Wyoming
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
Upcoming Events
3DEXPERIENCE FORUM 2022 at Diplomat Beach Resort Hollywood FL - Jun 6 - 8, 2022
Smart Manufacturing Experience at Pittsburgh PA - Jun 7 - 9, 2022
HxGN LIVE Global 2022 - Future of Manufacturing at Las Vegas NV - Jun 20 - 23, 2022



© 2022 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise