Hitachi Adopts Cadence AMS Model-Based Methodology and Tools for Mixed-Signal Design Verification

Accelerated mixed-signal verification by 160X for one of its largest designs and reduced full-chip simulation time to 30 minutes

SAN JOSE, Calif., June 2, 2016 — (PRNewswire) — Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced that Hitachi, Ltd. (TSE:6501) has adopted a Cadence® Analog Mixed-Signal (AMS) model-based methodology and tools to shorten the verification cycle for one of its largest mixed-signal design projects. By upgrading its previous transistor-level methodology to a model-based methodology, Hitachi successfully accelerated mixed-signal verification for this project by 160X and reduced full-chip simulation time to 30 minutes. The results were achieved by comparing the transistor-level and the model-based methodology on the same four CPUs. The significant reduction in the verification cycle time provided Hitachi with the ability to meet time-to-market goals for designs that integrate both analog and digital functions.

Cadence Logo

With its previous transistor-level methodology, Hitachi predominantly relied on block-level verification followed by tuning analog-digital interfaces to ensure full-chip functionality, which typically required multiple, costly iterations. By using a Verilog-AMS real number modeling and simulation flow supported by a full set of Cadence tools—Virtuoso® Analog Design Environment (ADE), Spectre® Accelerated Parallel Simulator (APS), Spectre eXtensive Partitioning Simulator (XPS), Virtuoso AMS Designer and Incisive® Enterprise Simulator—Hitachi reduced iterations and met its accuracy requirements, ultimately speeding time to market.

For more information on the Cadence tools, please visit

"We've had a trusted partnership with Cadence for many years, and our effective collaboration produced a design environment that significantly improved our productivity and helped us achieve design goals," said Satoshi Ueno, director of Design Engineering Second Department, Technology Development Operation 1, IT Platform Products Management Division, Information and Communication Technology Business Division at Hitachi, Ltd. "Cadence has the behavioral modeling expertise, methodology and tools that we needed to reduce our verification time and enable us to thoroughly verify our design—not just at the block level, but at the full-chip level, which includes sensitive analog-digital interfaces. The gains achieved have had a positive impact on our business, and we also plan to evaluate the Cadence tools and methodology for medical applications and various other system applications."

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers and research facilities around the world to serve the global electronics industry. More information about the company, its products and its services is available at

© 2016 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo, Incisive, Spectre and Virtuoso are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

For more information, please contact:
Cadence Newsroom
Email Contact

Logo -




To view the original version on PR Newswire, visit:

SOURCE Cadence Design Systems, Inc.

Cadence Design Systems, Inc.
Hitachi, Ltd.

Review Article Be the first to review this article
SolidCAM - See For Yourself

Featured Video
Mechanical Engineer for Flextronics at Milpitas, California
Failure Analysis Engineer for Flextronics at Milpitas, California
Geodesign Manager for Design Workshop at Aspen, Colorado
GIS ANALYST I.8030200 for Dallas County at DALLAS, Texas
GIS Analyst (Dallas Police) for City of Dallas at Dallas, Texas
Upcoming Events
DEVELOP 3D Live 2020 New Date November 3rd at Sheffield University ctagon and INOX Building, Durham Road Sheffield United Kingdom - Nov 3, 2020
Digital Twin 2020 - Now in November 2020 at Melbourne FL - Nov 4 - 5, 2020
Sensors Expo & Conference at McEnery Convention Center SAN JOSE CA - Nov 16 - 18, 2020
3D Collaboration & Interoperability Congress at Golden CO - Feb 20 - 24, 2021
Kenesto: 30 day trial

© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise