Aehr Test Systems Reports Financial Results for the Fourth Quarter and Fiscal Year Ended May 31, 2016

FREMONT, Calif., July 26, 2016 (GLOBE NEWSWIRE) -- Aehr Test Systems (NASDAQ:AEHR), a worldwide supplier of semiconductor test and burn-in equipment, today announced financial results for its fourth quarter and fiscal year ended May 31, 2016.

Fiscal Year Financial Results:

  • Net sales were $14.5 million, up 45% from $10.0 million in fiscal 2015.
  • GAAP net loss was $6.8 million, or $0.52 loss per diluted share, compared to a GAAP net loss of $6.6 million, or $0.55 loss per diluted share, in fiscal 2015.
  • Non-GAAP net loss was $5.8 million, or $0.44 loss per diluted share, compared to a non-GAAP net loss of $5.7 million, or $0.47 loss per diluted share, in fiscal 2015.

Fiscal Fourth Quarter Results:

  • Net sales were $1.6 million, compared to $1.8 million in the fourth quarter of fiscal 2015.
  • GAAP net loss was $3.1 million, or $0.23 loss per diluted share, compared to a GAAP net loss of $1.9 million, or $0.15 loss per diluted share, in the same quarter a year ago.
  • Non-GAAP net loss was $2.8 million, or $0.21 loss per diluted share, compared to a non-GAAP net loss of $1.6 million, or $0.13 loss per diluted share, in the same quarter a year ago.

An explanation of the use of non-GAAP financial information and a reconciliation of the non-GAAP financial measures to the most directly comparable GAAP financial measures can be found in this release.

Recent Business Highlights:

  • Received order for new FOX-XPTM production test cell totaling over $4.5 million that includes a FOX-XP Multi-Wafer Test and Burn-in System, a FOX-XP WaferPakTM Aligner, and an initial set of FOX-XP WaferPak Contactors.
  • Shipped initial FOX-1P Single-Wafer Test System to lead customer for final on-site qualification and acceptance.
  • Received follow-on order of more than $500,000 for multiple WaferPak full-wafer contactors for FOX-15 Multi-Wafer Burn-In and Test Systems from a leading supplier of automotive and industrial integrated circuits.
  • Received $4 million in follow-on orders for multiple ABTS™ Burn-in and Test Systems from a leading multi-national integrated circuit manufacturer.

Gayn Erickson, Presid ent and CEO of Aehr Test Systems, commented:

“We continue to make significant progress on the rollout of our next generation FOX-P platform of wafer level test and burn-in products, and we move into fiscal 2017 with greater optimism and expectations for a stronger year with significant bookings and revenue growth.

“We delivered to and received customer acceptance of our first FOX-XP Wafer Level Test and Burn-in System, multiple WaferPak Contactor designs and applications programs from our initial lead customer last quarter. This system and the WaferPak Contactors are being used for reliability and qualification test of integrated devices intended for a very high volume application. With the initial single slot system ordered, delivered and approved, and the success of the device qualification tests that are being run on this system, we are expecting production orders from this customer to meet their first quarter of calendar 2017 capacity needs, with a capacity ramp continuing through calendar 2018.

“In early June, we received the first order for our FOX-XP production test cell, totaling over $4.5 million, which includes a FOX-XP system configured to enable up to 18 wafers to be burned in and tested simultaneously. This second lead customer is one of the world’s largest semiconductor manufacturers and is forecasting device capacity growth that will drive the need for additional production burn-in capacity for multiple years into the future.

“During the quarter, we also received approval from our lead customer for our initial FOX-1P Single Wafer Test System and we have now shipped this system to the customer’s facility for final acceptance. While our development and checkout of this next generation system with this customer has taken longer than planned, the pre-shipment qualification testing by the customer was very thorough and we expect a smooth acceptance of this initial system at the customer's site. Shipment of the multiple follow-on production systems already in backlog and in final integration and test on our manufacturing floor is expected within the next quarter.

“As we announced in a separate release today, we have received $4 million in follow-on orders for our Advanced Burn-in and Test Systems (ABTS) from a major semiconductor customer, which is encouraging for our base business. The customer is running at full capacity in their production burn-in area and needed to add capacity both to satisfy increasing demand for existing products and for products that are just beginning their production ramp.

“We are off to a strong start for fiscal 2017 and see bookings momentum building with over $8.5 million in bookings this fiscal quarter, which began June 1st.  We are excited to have two top tier lead customers for our FOX-XP systems that represent a significant opportunity for Aehr Test, not only with the initial applications but also with other application areas at both of these customers. 

“With our new product offerings, Aehr Test offers a differentiated solution and compelling value proposition with our full turnkey application to address the new opportunities in the mobile, automotive, sensors, and IOT markets. Our ability to cost effectively test devices in wafer form or devices that are too small to handle in traditional packaged part burn-in system creates a significant opportunity for us moving forward.” 

Management Conference Call and Webcast
Aehr Test Systems will host a conference call and webcast today at 5:00 p.m. Eastern (2:00 p.m. PT) to discuss its fiscal 2016 fourth quarter and full year operating results. To access the call dial 888-510-1785 (+1 719-457-2661 outside the United States) and give the participant pass code 4651520. In addition, a live and archived webcast of the conference call will be available over the Internet at in the Investor Relations section. A replay of the conference call will also be available via telephone beginning approximately two hours after conclusion of the call through 8:00 p.m. ET on August 2, 2016. To access the replay dial-in information, please click here.

About Aehr Test Systems
Headquartered in Fremont, California, Aehr Test Systems is a worldwide provider of test systems for burning-in and testing logic and memory integrated circuits and has an installed base of more than 2,500 systems worldwide. Increased quality and reliability needs of the Automotive and Mobility integrated circuit markets are driving additional test requirements, capacity needs and opportunities for Aehr Test products in package and wafer level test. Aehr Test has developed and introduced several innovative products, including the ABTSTM and FOX families of test and burn-in systems and WaferPak contactors. The ABTS systems are used in production and qualification testing of packaged parts for both low-power and high-power logic as well as memory devices. The FOX family of systems includes single and multi-wafer full wafer contact test and burn-in systems used for burn-in and functional test of complex devices, such as leading-edge memories, digital signal processors, microprocessors, microcontrollers and systems-on-a-chip. The WaferPak contactor contains a unique full wafer probe card capable of testing wafers up to 300mm that enables IC manufacturers to perform test and burn-in of full wafers on Aehr Test FOX systems. For more information, please visit Aehr Test’s website at

Safe Harbor Statement
This press release contains certain forward-looking statements based on current expectations, forecasts and assumptions that involve risks and uncertainties. These statements are based on information available to Aehr Test as of the date hereof and actual results could differ materially from those stated or implied due to risks and uncertainties. Forward-looking statements include statements regarding Aehr Test's expectations, beliefs, intentions or strategies regarding the future including statements regarding future market opportunities and conditions, expected product shipment dates, customer orders or commitments and future operating results. The risks and uncertainties that could cause Aehr Test’s results to differ materially from those expressed or implied by such forward-looking statements include, without limitation, general market conditions, customer demand and acceptance of Aehr Test’s products and Aehr Test’s ability to execute on its business strategy. See Aehr Test’s recent 10-K, 10-Q and other reports from time to time filed with the Securities and Exchange Commission for a more detailed description of the risks facing Aehr Test’s business. Aehr Test disclaims any obligation to update information contained in any forward-looking statement to reflect events or circumstances occurring after the date of this press release.

1 | 2 | 3 | 4 | 5  Next Page »

Review Article Be the first to review this article
Featured Video
MECHANICAL ENGINEERING for L3Harris at Hamilton,, Canada
Upcoming Events
IMTS 2022 at McCormick Place Chicago IL - Sep 12 - 17, 2022
FABTECH 2022 at Georgia World Congress Center Atlanta GA - Nov 8 - 10, 2022

© 2022 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise