Microsemi Unveils Six New Wideband, High Performance MMIC Products Covering DC-26 GHz for Defense and Industrial Markets

Company's Wideband Low Noise Amplifier MMICs and Wideband GaAs MMIC Switches are ideal for Test and Measurement, Electronic Warfare and Radar Applications

ALISO VIEJO, Calif., Dec. 8, 2016 — (PRNewswire) — Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced six new monolithic microwave integrated circuit (MMIC) products, including four wideband low noise MMIC amplifiers ( MMA040AA , MMA041AA, MMA043AA and MMA044AA) and two wideband gallium arsenide (GaAs) MMIC switches ( MMS006AA and MMS008AA). The new MMIC products are ideally suited for test and measurement, electronic warfare and radar applications.

Microsemi Corporation.

"Our new high linearity MMIC amplifiers and switches represent Microsemi's significant investment in expanding our Forever MMIC product portfolio as we continue addressing customers' highly specific and complex MMIC requirements with affordable, low-risk solutions that can also reduce end-equipment bill of materials costs and represent long-term value to the customer," said Kevin Harrington, director of strategic marketing for Microsemi's RF/Microwave Discrete Products business unit. "The Forever MMICs are another example of Microsemi's steadfast commitment to providing a continuous supply of product for the support of long-term defense, industrial and commercial programs."

Microsemi's new devices are ideal for a number of applications primarily within the defense and industrial markets, including receiver front end amplifiers for electronic warfare (EW) and signal intelligence (SIGINT); and wideband bench top and portable measurement equipment up to 26 GHz. Compared with existing market solutions, Microsemi's new wideband low noise MMIC amplifiers deliver excellent performance with flat gain over a wide frequency range, and significantly better output third-order intercept point (OIP3) performance. Similarly, the new GaAs MMIC switches provide broad frequency coverage combined with superior insertion loss, isolation and input third-order intercept point (IIP3) performance. Global market research and consulting company Strategy Analytics estimates that GaAs MMICs sold into the EW, radar and microwave communications markets will reach $500 million by 2019.

The MMA040AA, a DC to 28 GHz distributed low noise amplifier, features a low noise figure of 2.5 decibel (dB), flat gain of 16 dB and provides 27 decibel-milliwatts (dBm) of OIP3 linearity. The MMA041AA, a DC to 26 GHz distributed low noise amplifier, features 3.2 dB noise figure, 18 dB gain and 35 dBm of OIP3 linearity. The MMA043AA, a 0.5 to 12 GHz low noise amplifier, offers a 1.4 dB noise figure, 16.5 dB of gain and 29 dBm of OIP3 linearity. The MMA044AA low noise amplifier operates across the 6 to 18 GHz band and provides a low noise figure of 1.7 dB, in combination with 21 dB of gain and 30 dBm of OIP3 linearity.

The MMS006AA, a DC to 20 GHz single pole double throw (SPDT), non-reflective MMIC switch, features high isolation of 45 dB and low insertion loss of 1.5 dB at 15 GHz. The MMS008AA is a DC to 8 GHz single pole four throw (SP4T), non-reflective MMIC switch that offers over 45 dB of isolation and less than 1.7 dB insertion loss. Both devices handle up to 30 dBm of input power and offer high input third-order intercept performance of 42 dBm and 46 dBm respectively. All six MMIC devices feature radio frequency (RF) ports that are internally matched to 50 Ohms and are available in bare die, which facilitates easy integration into multi-chip modules (MCMs).

Key features of Microsemi's new wideband low noise MMIC amplifiers include:

Parameter

MMA040AA

MMA041AA

MMA043AA

MMA044AA

Operating Frequency

DC-28 GHz

DC-26 GHz

0.5-12 GHz

6-18 GHz

Noise Figure

2.5 dB

3.2 dB

1.4 dB

1.7 dB

Gain

16 dB

18 dB

16.5 dB

21 dB

Output IP3

26.5 dBm

35 dBm

29 dBm

30 dBm

Supply

8V/60 mA

7V/150 mA

5V/55 mA

4V/105 mA

Input/Output Impedance

50 Ohms

50 Ohms

50 Ohms

50 Ohms

Die Size

3mm x 1.3mm x 0.1mm

3mm x 1.3mm x 0.1mm

2.2mm x 1.3mm x 0.1mm

1.12mm x 1.3mm x 0.1mm

 

Key features of Microsemi's new wideband GaAs MMIC switches include:

Parameter

MMS006AA

MMS008AA

Operating Frequency

DC-20 GHz SPDT

DC-8 GHz SP4T

Insertion Loss

1.5 dB @ 15 GHz

<1.7 dB

Isolation

45 dB @ 15 GHz

>40 dB

Input IP3

42 dBm

46 dBm

Return Loss

15 dB

15 dB

Maximum Input Power

30 dBm

30 dBm

Input/Output Impedance

50 Ohms

50 Ohms

Control Logic

0/-5V

0/-5V

Die Size

1.3mm x 0.85mm x 0.1mm

1.1mm x 1.2mm x 0.1mm


1 | 2  Next Page »



Review Article Be the first to review this article

SolidCAM - Learn More

Featured Video
Editorial
Jobs
Applications Programmer Analyst I for Southern Nevada Health District at Las Vegas, Nevada
GIS Project Manager for VHB at Wethersfield, Connecticut
Applications Programmer Analyst II for Southern Nevada Health District at Las Vegas, Nevada
Upcoming Events
Robotics Summit & Expo at Seaport World Trade Center 1 Seaport Lane Boston MA - Sep 24 - 25, 2020
DEVELOP 3D Live 2020 New Date November 3rd at Sheffield University ctagon and INOX Building, Durham Road Sheffield United Kingdom - Nov 3, 2020
Digital Twin 2020 - Now in November 2020 at Melbourne FL - Nov 4 - 5, 2020
Sensors Expo & Conference at McEnery Convention Center SAN JOSE CA - Nov 16 - 18, 2020
MasterCAM



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise