Lattice Semiconductor Releases New Embedded Vision Development Kit Targeted for Mobile-Influenced Applications at the Edge

Modular Platform Enables Flexible Connectivity and Energy Efficient Image Processing for Robotics, Drones, ADAS, Smart Surveillance and AR/VR Systems

PORTLAND, OR – May 1, 2017 –  Lattice Semiconductor Corporation (NASDAQ: LSCC), the leading provider of customizable smart connectivity solutions, today announced the availability of its Embedded Vision Development Kit, the first-of-a-kind development kit optimized for mobile-influenced system designs that require flexible, low cost, and low power image processing architectures. By leveraging a mix of Lattice’s FPGA, ASSP and programmable ASSP (pASSP™) products in a single, modular platform, this unique solution provides the right balance of flexibility and energy efficiency required for a variety of embedded vision applications in the industrial, automotive and consumer markets.

The new Embedded Vision Development Kit takes advantage of the company’s smart connectivity and acceleration product lines, equipping customers with a comprehensive, integrated solution for developing designs and enabling faster time-to-market. By combining the  CrossLink pASSP mobile bridging device,  ECP5 low power, small form factor FPGA, along with its high-bandwidth, high resolution  HDMI ASSP, Lattice is offering an innovative solution that accelerates development of intelligent, vision-enabled devices at the edge.

To enable and realize the true value of IoT, edge intelligence, which pushes processing for data intensive and processing applications away from the core to the edge of the network, continues to expand according to  IDC. The market analyst firm has forecasted intelligent systems revenue to exceed $2.2 trillion in 2020.1

“As intelligence at the edge continues to increase, more applications will require integrated embedded vision technology,” said Deepak Boppana, director, product marketing at Lattice Semiconductor. “Our Embedded Vision Development Kit accelerates the adoption of mobile-influenced technology for applications including machine vision, smart surveillance cameras, robotics, AR/VR, drones and Advanced Driver Assistance Systems (ADAS).”

The CrossLink input board includes dual-camera HD image sensors supporting the MIPI CSI-2 interface, eliminating the need for external video sources. The ECP5 base board enables low-power pre/post processing and includes support for HD image signal processing (ISP) intellectual property (IP) from  Helion Vision. Also included is a  NanoVesta connector to support external image sensor video inputs. The HDMI output board based on the  Sil1136 non-HDCP version enables connectivity to standard HDMI displays.

The Embedded Vision Development Kit is available now from Lattice and its distributors. To learn more, visit  http://www.latticesemi.com/evdkit. Lattice's complete product portfolio for Embedded Vision Solutions can be found at  www.latticesemi.com/EVsolutions.

Lattice at the Embedded Vision Summit 2017 – Santa Clara, CA

Lattice will be showcasing its new Embedded Vision Development Kit, along with other machine learning demos, including 3D depth map generation, object detection and binarized neural network implementation at booth #209 at the Santa Clara Convention Center from Monday, May 1, 2017 - Tuesday, May 2, 2017. 

1Source:  IDC Press Release, "Increasing Edge Intelligence and Connectivity to Drive Intelligent Systems Volumes through 2020; IDC Forecasts Intelligent Systems Revenue to Exceed $2.2 Trillion In 2020," May 17, 2016.

About Lattice Semiconductor

Lattice Semiconductor (NASDAQ: LSCC) provides smart connectivity solutions powered by our low power FPGA, video ASSP, 60 GHz millimeter wave, and IP products to the consumer, communications, industrial, computing, and automotive markets worldwide. Our unwavering commitment to our customers enables them to accelerate their innovation, creating an ever better and more connected world.

For more information about Lattice please visit  www.latticesemi.com

Lattice Semiconductor Corporation, Lattice Semiconductor (& design), CrossLink, pASSP, ECP5 and specific product designations are either registered trademarks or trademarks of Lattice Semiconductor Corporation or its subsidiaries in the United States and/or other countries.

MIPI is a licensed trademark of MIPI, Inc. in the U.S. and other jurisdictions.

GENERAL NOTICE: Other product names used in this publication are for identification purposes only and may be trademarks of their respective holders.

 

Contacts:

Sherrie Gutierrez
Lattice Semiconductor
Phone: 408-826-6752
Email Contact




Review Article Be the first to review this article
SolidCAM - Learn More

Featured Video
Editorial
Latest Blog Posts
Sanjay GangalMCADCafe Lens
by Sanjay Gangal
NVIDIA GTC October 2020 Keynote
Jobs
Service Software Expert-CATIA & CAA for Dassault Systemes at Shanghai, China
Electrical Engineer for Lockheed Martin at Liverpool, New York
Design Engineer - Tilt Up and Bracing for Commercial Metals Company at Dallas, Texas
Detailing/ PM Manager for Commercial Metals Company at Dallas, Texas
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
Upcoming Events
PLM Road Map & PDT Spring 2021 at 3909 Research Park Drive Ann Arbor MI - May 19 - 20, 2021
TCT ASIA 2021 at National Exhibition and Convention Centre(NECC) Shanghai China - May 26 - 28, 2021
RAPID + TCT at McCormick Place Chicago IL - Sep 13 - 15, 2021
WESTEC Online at Online CA - Sep 21 - 23, 2021
Kenesto: 30 day trial
MasterCAM



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise