EIZO Announces Industry-First Rugged DisplayPort Video Format Converters for GPU Users Supporting Multiple New and Legacy Monitors

  • The Adapt Series was designed to convert DisplayPort outputs to DVI, VGA, and potentially support other connector types such as MIL-DTL-38999. Support for 3G-SDI and STANAG 3350 and other formats are to follow.
  • EIZO’s rugged FPGA-based Adapt Series alleviates the need for board re-designs and specialist graphics/video cards – no external power is required so video format converters are SWaP-efficient.

ALTAMONTE SPRINGS, Fla. — (BUSINESS WIRE) — July 19, 2017 — EIZO Rugged Solutions Inc. (formerly Tech Source, Inc.) has introduced its Adapt Series family of MIL-STD-810 rugged DisplayPort video format converters to allow customers to support a combination of new and legacy monitors in airborne, ground-based, and C4ISR applications.

The Adapt Series is designed to convert DisplayPort outputs to traditional video formats such as DVI or VGA and to support other connector types such as MIL-DTL-38999. The FPGA-based design of the Adapt Series allows EIZO to quickly add converters for other video formats, such as 3G-SDI and STANAG 3350 when required by customers.

Adapt products are designed for military-level shock and vibration (MIL-STD-810) environments and are able to operate at high temperatures of -40 to 85°C. No external power is required.

Selwyn L. Henriques, president and CEO of EIZO Rugged Solutions, said, “Our Adapt Series, the industry’s first rugged video format converters, provide a cost-effective, SWaP-efficient solution to customers that need to support several new and legacy monitors with different input formats. These new products alleviate the need for graphics/video board re-designs, for example, to add a new I/O interface and support to a particular monitor. It can also reduce the card count in certain applications where custom graphics/video cards would otherwise be the only solution to support a legacy display.”

The Adapt Series video format converters work with EIZO’s Condor GPGPU XMC graphics cards. For example, the Condor 4000xX-6DP XMC graphics card, which comes with six DisplayPort outputs on the rear XMC I/O, can be adapted using the video format converters to provide a combination of DVI, VGA, and DisplayPort outputs going to six different monitors.

For more information on the Adapt Series or any other product from EIZO Rugged Solutions, please visit www.eizorugged.com, email rugged@eizo.com, or call +1 (407) 262-7100.

Media Photo:
http://www.eizorugged.com/press/releases/images/Adapt_press.jpg

Product datasheet:
http://www.eizorugged.com/support/brochures/pdfs/Adapt.pdf

About EIZO Rugged Solutions ( www.eizorugged.com)
EIZO Rugged Solutions Inc., formerly Tech Source, Inc., has been developing graphics and video solutions for air traffic control, military, and embedded applications for over 28 years. The ISO9001:2008 certified company offers a range of commercial off-the-shelf (COTS) products, including graphics processors targeted at GPGPU applications, video input solutions, video compression and streaming boards, imaging cards, recording solutions and software libraries.

All product names are trademarks or registered trademarks of their respective companies. EIZO is a registered trademark of EIZO Corporation.



Contact:

EIZO Rugged Solutions Inc.
John Payne
Phone: +1 (407) 262-7100
Email: Email Contact




Review Article Be the first to review this article

SolidCAM - Learn More

Featured Video
Editorial
Jobs
GIS Project Manager for VHB at Wethersfield, Connecticut
Applications Programmer Analyst I for Southern Nevada Health District at Las Vegas, Nevada
Applications Programmer Analyst II for Southern Nevada Health District at Las Vegas, Nevada
Upcoming Events
Robotics Summit & Expo at Seaport World Trade Center 1 Seaport Lane Boston MA - Sep 24 - 25, 2020
DEVELOP 3D Live 2020 New Date November 3rd at Sheffield University ctagon and INOX Building, Durham Road Sheffield United Kingdom - Nov 3, 2020
Digital Twin 2020 - Now in November 2020 at Melbourne FL - Nov 4 - 5, 2020
Sensors Expo & Conference at McEnery Convention Center SAN JOSE CA - Nov 16 - 18, 2020
MasterCAM



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise