Rudolph Technologies Announces Rapid Adoption of the Dragonfly G2 System for Advanced Packaging Inspection

One quarter after release, the new Dragonfly platform achieves market recognition in advanced macro inspection with multiple deliveries to world’s largest OSAT

WILMINGTON, Mass. — (BUSINESS WIRE) — January 8, 2019 — Rudolph Technologies, Inc. (NYSE: RTEC) announced today that it has received orders for 12 of its Dragonfly™ G2 system, just months after releasing the product. Several systems were delivered in the fourth quarter to the largest OSAT where the Dragonfly G2 systems displaced incumbent 3D technology and retained the Company’s market leadership in 2D macro inspection. The remaining systems will ship in the first half of 2019 to OSAT, IDM, and Foundry customers who are adopting the Dragonfly G2 platform for its high productivity in two-dimensional (2D) inspection, and its accuracy and repeatability in three-dimensional (3D) inspection of the smallest copper pillars. The Company expects additional adoptions of the Dragonfly G2 system across multiple key market segments in the first half of 2019, which validates Rudolph’s collaborative R&D approach with its key customers.

The new Dragonfly G2 platform delivers up to 150% improvement in productivity over legacy systems as well as exceeds competitive system throughputs. Its modular architecture provides a flexible platform with plug-and-play configurability to combine 2D with 3D Truebump™ Technology for accurate copper pillar/bump height measurements. Clearfind™ Technology detects non-visual residue defects and advanced sensor technology measures 3D features and CD metrology. Additionally, the Dragonfly G2 platform has been specifically architected to allow the measurement, data collection, and analysis of bump interconnects nearing 100 million bumps per wafer using Rudolph’s Discover® software and advanced computing architecture.

“We are pleased that our leading-edge customers across multiple market segments are quickly recognizing the value of the Dragonfly G2 system,” said Michael Plisinski, chief executive officer at Rudolph. “Today’s interconnects for advanced memory are now at or below five microns, which require higher accuracy and repeatability versus standard copper pillar bumps. With approximately 65 wafer-level packages in today’s high-end smartphones, a single weak interconnect or reliability failure can result in a high cost of return, driving our customers’ need for the enhanced process control performance. Defect sensitivity, resolution, and productivity are combined in the Dragonfly G2 system to deliver a capability and cost of ownership that is unparalleled in the competitive space.”

For more information about Rudolph’s process control solutions, visit www.rudolphtech.com.

About Rudolph Technologies
Rudolph Technologies, Inc. is a leader in the design, development, manufacture and support of defect inspection, lithography, process control metrology, and process control software used by semiconductor and advanced packaging device manufacturers worldwide. Rudolph delivers comprehensive solutions throughout the fab with its families of proprietary products that provide critical yield-enhancing information, enabling microelectronic device manufacturers to drive down costs and time to market of their devices. Headquartered in Wilmington, Massachusetts, Rudolph supports its customers with a worldwide sales and service organization. Additional information can be found on the Company’s website at www.rudolphtech.com.

Safe Harbor Statement
This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 (the “Act”) which include the benefit to customers of Rudolph’s products, Rudolph’s business momentum and future growth and the market demand for semiconductors generally as well as other matters that are not purely historical data. Rudolph wishes to take advantage of the “safe harbor” provided for by the Act and cautions that actual results may differ materially from those projected as a result of various factors, including risks and uncertainties, many of which are beyond Rudolph’s control. Such factors include, but are not limited to, Rudolph’s ability to plan and manage its resources and production capability, including its supply chain and fluctuations in customer capital spending. Additional information and considerations regarding the risks faced by Rudolph are available in Rudolph’s Form 10-K report for the year ended December 31, 2017 and other filings with the Securities and Exchange Commission. As the forward-looking statements are based on Rudolph’s current expectations, the company cannot guarantee any related future results, levels of activity, performance or achievements. Rudolph does not assume any obligation to update the forward-looking information contained in this press release.



Contact:

Investors:
Michael Sheaffer
978.253.6273
Email Contact

Trade Press:
Amy Shay
952-259-1794
Email Contact




Review Article Be the first to review this article

SolidCAM - See For Yourself

Featured Video
Editorial
Latest Blog Posts
Sanjay GangalMCADCafe Lens
by Sanjay Gangal
NVIDIA GTC October 2020 Keynote
Jobs
3D Designer and Developer for Los Alamos National Laboratory at Los Alamos,, New Mexico
Failure Analysis Engineer for Flextronics at Milpitas, California
Mechanical Engineer for Flextronics at Milpitas, California
Structural Engineer for Kiewit at Lenexa, Kansas
Structural Engineer 2 (Engineer 2) for Los Alamos National Laboratory at Los Alamos,, New Mexico
Design Engineer (Engineer 1/2) for Los Alamos National Laboratory at Los Alamos,, New Mexico
Upcoming Events
DEVELOP 3D Live 2020 New Date November 3rd at Sheffield University ctagon and INOX Building, Durham Road Sheffield United Kingdom - Nov 3, 2020
Digital Twin 2020 - Now in November 2020 at Melbourne FL - Nov 4 - 5, 2020
Sensors Expo & Conference at McEnery Convention Center SAN JOSE CA - Nov 16 - 18, 2020
Spatial 3D Insider Summit - Free VR Event! at United States - Nov 16 - 17, 2020
Kenesto: 30 day trial



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise