SAE International Publishes First Additive Manufacturing Polymer Specifications for Aerospace Industry

AMS7100 and AMS 7101 Define Consistent Materials and Processes for Aero Parts

WARRENDALE, Pa., Oct. 22, 2019 — (PRNewswire) —

WARRENDALE, Pa., Oct. 22, 2019 /PRNewswire-PRWeb/ -- SAE International today released the first Additive Manufacturing (AM) Polymer specifications for the aerospace industry. AMS7100: Fuse Filament Fabrication Process and AMS7101: Material for Fused Filament Fabrication represent the first specifications released under the AMS-AM Additive Manufacturing Non-Metallic (AMS-AM-P) committee. These standards were created following a request from airlines through the International Air Transport Association (IATA)'s EMG to be able to realize additively manufactured plastic cabin parts.

"Both additive manufacturing users and producers will benefit from implementing AMS-AM standards," said, Paul Jonas, Director - Technology Development & Programs at the National Institute for Aviation Research (NIAR) and AMS-AM-P Chair. "These standards help define a consistent set of materials and process limits that both the user and producer agree to in support of part procurement activities. AMS-AM standards support the promotion of knowledge, standardization of practice and advancement of commerce in the emerging AM aerospace industry."

The AMS7100 specification establishes the critical controls and requirements to produce reliable, repeatable, reproducible aerospace parts by Fused Deposition Modeling (FDM®) or other material extrusion production. This procedure creates guidelines that FDM System users will follow to approve new machines, processes and materials. Specifically, this new specification covers the configuration of the machine, operating software, machine calibration, machine and build parameters, and testing methodology required to create certified additively manufactured aerospace parts.

The AMS7101 specification establishes the certification requirements for materials to be used in FDM or other material extrusion additive manufacturing production for aerospace components. This specification outlines the technical information, production guidelines and documentation requirements for FDM material manufacturer.

"Following the success and momentum of the SAE AMS-AM Metallic Materials committee, the swift efforts of the AMS-AM-P committee helped bring these groundbreaking, aerospace-grade AMS specifications to the global stakeholder community," said David Alexander, Director, SAE Aerospace Standards Program.

SAE International's AMS-AM committee collaborates with regulatory bodies in the aerospace industry, material and machine manufacturers, AM suppliers, and users to develop standards that support certification and qualification of aerospace hardware and address gaps in aerospace industry standards. The AMS-AM has published four AM Metals specifications in 2019—totaling nine AMS-AM-M Standards—with plans to release additional AMS-AMA-M and AMS-AM-P Polymer specifications in the future.

About SAE International
SAE International is a global association committed to advancing mobility knowledge and solutions for the benefit of humanity. By engaging nearly 200,000 engineers, technical experts and volunteers, we connect and educate mobility professionals to enable safe, clean, and accessible mobility solutions. We act on two priorities: encouraging a lifetime of learning for mobility engineering professionals and setting the standards for industry engineering. We strive for a better world through the work of our philanthropic SAE Foundation, including programs award-winning programs like A World in Motion® and the Collegiate Design Series™. More at http://www.sae.org.

###

 

SOURCE SAE International

Contact:
Company Name: SAE International
Web: http://www.sae.org




Review Article Be the first to review this article
SolidCAM - Learn More

Featured Video
Editorial
Jobs
Mechanical R&D Engineer for Stellartech Research Corp at Milpitas, California
Mid-Level Mechanical Engineer in Process Piping for Gordon Prill, Inc at Santee, California
Senior Software 11 Engineer – MCAD…Valley for EDA Careers at San Jose, California
Geographic Info Specialist II for Texas Department of Transportation at Austin, Texas
Project Coordinator (Utility Coordination Team) for City of Austin at Austin, Texas
Geographical Information Systems (GIS) Technician for Seacoast Utility Authority at Palm Beach Gardens, Florida
Upcoming Events
CES - The Global Stage for Innovation at LAS VEGAS NV - Jan 7 - 10, 2020
AHR Expo at Orange County Convention Center West Building Orlando FL - Feb 3 - 5, 2020
Design & Manufacturing at Anaheim Convention Center Anaheim CA - Feb 11 - 13, 2020
METAV 2020 at Düsseldorf Germany - Mar 10 - 13, 2020
Kenesto: 30 day trial
SolidCAM:



Internet Business Systems © 2019 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise