Nominations for the 57th Design Automation Conference Innovators Under 40 Award Now Open

Engineers from industry giants to academia to be recognized for contributions to EDA

SAN FRANCISCO — (BUSINESS WIRE) — February 11, 2020 — For 57 years, the future of innovation for the design and automation of electronic systems and circuits has been found at the Design Automation Conference (DAC). This year will be no different. DAC is now accepting nominations for the Under-40 Innovators Award at the 57th DAC. The Under-40 Innovators Award is sponsored by Association for Computing Machinery (ACM), and the Institute of Electrical and Electronics Engineers (IEEE). The award will recognize up to five of the top young innovators (nominees should be 40 years or younger in age as of June 1, 2020) who are movers and shakers in the field of design and automation of electronics.

The 57th DAC will be held at Moscone West Center in San Francisco, CA, from July 19-23, 2020. DAC will co-locate with SEMICON West 2020, which is being held at the Moscone Center, North and South Halls, July 21-23, 2020.

From beyond the traditional automation around chip implementation, design automation is rapidly expanding to new areas such as neuromorphic computing, biological systems, cyber-security and cyber-physical systems. Within the electronics industry, the advent of new technologies and alternate scaling approaches using new integration methods are emerging as traditional CMOS technology scaling slows down. Young innovators are redefining and shaping the future of the design automation field in industry, research labs, start-ups and academia, and DAC wants to recognize the best and brightest.

Nomination criteria:

The Under-40 Innovators Award is open to people in industry or academia with technical contributions of notable impact in the field of design and automation of electronics. Nominees are individuals who have made their contributions through work within an organization to the design automation community and to the broader society. The award is intended for specific contributions such as commercial products, software or hardware systems, or specific algorithms or tools incorporated into other systems widely used by industry and academia. Nominations that emphasize only metrics such as number of publications, patents, and citations will not be sufficient. The impact as measured by commercialization and/or wide adoption of the nominee’s contributions is required.

The nomination for this award should include a one-page summary (fewer than 500 words) of the nominee’s technical work with specific emphasis on the impact of the work, a cover page with the email address, daytime telephone number and date of birth of the nominee. All nominations should be supported by at least three letters of recommendation. One of those letters of recommendation needs to be from a leader inside the nominee’s organization. Self-nominations are not allowed.

Up to five awards will be given each year at DAC, sponsored by ACM, and IEEE. The winners will be recognized at the opening session at the 57th DAC. Nominations must be received by March 31, 2020 as a single PDF file and sent to: dacunder40award@dac.com

Previous Under 40 Innovator Award Recipients:

56th DAC:

  • Yunji Chen, Full professor, Institute of Computing Technology, Chinese Academy of Sciences
  • Huichu Liu, Staff Research Scientist, Intel Corporation
  • Rasit Onur Topaloglu, Senior Hardware Developer & Program Manager, IBM Corp.
  • Robert Wille, Professor, Johannes Kepler University Linz, Austria
  • Vijay Raghunathan, Professor of Electrical and Computer Engineering, Purdue University

55th DAC

  • David Atienza, Associate Professor at École polytechnique fédérale de Lausanne (EPFL)
  • Sheng Li, Platform Architect at Google
  • Arijit Raychowdhury, Associate Professor at Georgia Tech
  • Yu Wang, Associate Professor of Tsinghua University and co-founder of DeePhi Tech
  • Zhiru Zhang, Associate Professor at Cornell Univ.

54th DAC:

  • John Arthur, Research Staff Member and Hardware Manager, IBM Research – Almaden
  • Paul Cunningham, Vice President of R&D, Cadence Design Systems, Inc.
  • Douglas Densmore, Associate Professor, Boston Univ.
  • Yongpan Liu, Associate Professor, Tsinghua Univ.
  • Sasikanth Manipatruni, Physicist/Engineer, Intel Corp.

For additional information on the award, and the Design Automation Conference visit www.dac.com

About DAC

The Design Automation Conference (DAC) is recognized as the premier event for the design of electronic circuits and systems, and for electronic design automation (EDA) and silicon solutions. A diverse worldwide community representing more than 1,000 organizations attends each year, represented by system designers and architects, logic and circuit designers, validation engineers, CAD managers, senior managers and executives to researchers and academicians from leading universities. Close to 60 technical sessions selected by a committee of electronic design experts offer information on recent developments and trends, management practices and new products, methodologies and technologies. A highlight of DAC is its exhibition and suite area with approximately 200 of the leading and emerging EDA, silicon, intellectual property (IP) and design services providers. The conference is sponsored by the Association for Computing Machinery (ACM), and the Institute of Electrical and Electronics Engineers (IEEE), and is supported by ACM's Special Interest Group on Design Automation (ACM SIGDA) and IEEE’s Council on Electronic Design Automation (CEDA).

Design Automation Conference acknowledges trademarks or registered trademarks of other organizations for their respective products and services.



Contact:

Michelle Clancy: press@dac.com or call 1-303-530-4334




Review Article Be the first to review this article
Featured Video
Editorial
Latest Blog Posts
Jeff RoweMCADCafe Editorial
by Jeff Rowe
MCADCafe Industry Predictions for 2020
Jobs
Mechanical Engineer for Arista Networks at Santa Clara, California
Software Engineer II - MCAD for ANSYS, Inc. at san jose, California
Advanced GIS Specialist for Wisconsin Department of Natural Resources at Madison, Wisconsin
Upcoming Events
DELRAY Systems Presents: 3D Summit 2020 at 419 Golf View Lane Rochester MI - Feb 27, 2020
METAV 2020 at Düsseldorf Germany - Mar 10 - 13, 2020
NVIDIA’s GPU Technology Conference (GTC) at San Jose McEnery Convention Center 150 West San Carlos Street San Jose CA - Mar 22 - 26, 2020
AMUG 2020 at Chicago IL - Mar 22 - 26, 2020
Kenesto: 30 day trial
SolidCAM:



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise