intrinSIM Releases Generative Design Workflow Assessment Report for Autodesk Fusion 360 Generative Design

March 03, 2020 -- Clarkesville, GA – intrinSIM, a premier source of go-to-market services and technology licensing for engineering applications, has released an intrinSIM Market Report covering the assessment of the Autodesk Fusion 360 Generative Design workflow. This market report provides an assessment of the Generative Design workflow based on the January 2020 version of Autodesk Fusion 360.

This assessment is uses the capability assessment model related to the Key Capability Areas of Generative Design for General Applicability and their associated criteria outlined in the intrinSIM Market Report entitled “A Vision for Generative Design” which explores the potential paradigm shift enabled by Generative Design and what is required to enable that design paradigm shift. intrinSIM has developed a process with quantified assessment for each key capability area in the capability assessment model and criteria outlined in “A Vision for Generative Design”. This report looks at the assessment of the Autodesk Fusion 360 Generative Design (Fusion 360 GD) workflow with respect to the Key Capability Areas of Generative Design for General Applicability and its suitability of Generative Design workflows for five (5) sample applications.

“Generative Design has the potential to dramatically change the design process as we know it.  However, deployment of Generative Design is slow beyond the use by innovators as it is unclear to most if they can use Generative Design for their application,” says Joe Walsh, CEO of intrinSIM LLC.  “This report sets a precedence in the Generative Design space by establishing a quantitative and objective means to evaluate workflow capabilities and requirements. The methodology used enables determination of the potential suitability of a specific Generative Design workflow for a specific application without the need for complex software evaluations.”

intrinSIM reviewed the January 2020 Fusion 360 GD workflow capabilities in collaboration with Autodesk and did a preliminary review of ten other Generative Design workflows capabilities based on publicly available information. The detailed assessment of the Fusion 360 GD workflow was combined with the preliminary detailed reviews of the ten other Generative Design workflows to develop an overall “industry” Generative Design mean and maximum rankings for all 11 Key Capability Areas of Generative Design for General Applicability.

  1. Handling all appropriate objectives and constraints
  2. Handling multiple operational (load) conditions
  3. Handling multi-physics
  4. Handling multiple manufacturing processes
  5. Handling cost as an objective or constraint
  6. Handling Generative Design in an assembly/system context
  7. Enabling informed, comprehensive and efficient exploration of viable design alternatives
  8. Enabling efficient & effective transformation to detailed design analysis
  9. Enabling efficient selection guidance of generated design concepts
  10. Enabling Generative Design within the designer’s process, context & terminology
  11. Enabling broad accessibility to Generative Design

The assessment of the Autodesk Fusion 360 Generative Design workflow also illustrates how the Autodesk Fusion 360 Generative Design workflow compares the Autodesk Fusion 360 Generative Design workflow ranking to the “industry” rankings for each the 11 Key Capability Areas of Generative Design for General Applicability.  This comparison to industry ranking enabled classification of the Autodesk Fusion 360 Generative Design workflow for each key capability area into one of four classifications.

  1. Market Leader
  2. Strongly Competitive
  3. Competitive
  4. Not Competitive

About intrinSIM

intrinSIM was launched in January of 2010 to accelerate the growth of the Engineering Software market leveraging a unique technology broker model, Engineering Software market domain knowledge and a network of Technology Partners, Services Partners and Resources to bring the right people, services, data, and technologies to bear at the right time to overcome the gaps and incompatibilities between business, route to market and technology.  intrinSIM has already worked with over 100’s of companies spread across the world in the Engineering Software market in a variety of roles and activities related to Connecting Worldwide Business & Technology.  intrinSIM is also a Founding Sponsor of the ASSESS Initiative and has an active  leadership role in the ASSESS Initiative.  For more information, visit the intrinSIM web site at .



Read the complete story ...

Review Article Be the first to review this article
SolidCAM - Learn More

Featured Video
Mechanical Engineer for Proos Manufacturing, inc at Grand Rapids,, Michigan
GIS ANALYST for Dallas County at DALLAS, Texas
GIS Analyst for City of Marble Falls TX at Marble Falls, Texas
Upcoming Events
DEVELOP 3D Live 2020 at Sheffield University ctagon and INOX Building, Durham Road Sheffield United Kingdom - Apr 16, 2020
RAPID + TCT 2020 at Anaheim Convention Center Anaheim CA - Apr 21 - 23, 2020
Drive Works World 2020 at Chicago IL - Apr 29 - 3, 2020
AM Medical at Minneapolis MN - May 27 - 28, 2020
Kenesto: 30 day trial

© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise