Materialise Announces Pricing of Public Offering of 4.0 Million American Depositary Shares (ADSs)

Leuven, Belgium, June 10, 2021 (GLOBE NEWSWIRE) --  Materialise NV (“Materialise”) (NASDAQ: MTLS), a leading provider of additive manufacturing and medical software and of sophisticated 3D printing services, announced today the pricing of its registered underwritten public offering of 4.0 million ADSs at a public offering price of US$24.00 per ADS. Each ADS will represent one ordinary share with no nominal value per share.

Materialise’s ADSs are currently listed on the Nasdaq Global Select Market under the symbol “MTLS”.

The offering is expected to close on June 14, 2021, subject to the satisfaction of customary closing conditions. The Company has granted the underwriters a 30-day option to purchase up to an additional 600,000 ADSs at the public offering price, less the underwriting discount, to cover over-allotments, if any.

J.P. Morgan Securities LLC is acting as sole representative of the underwriters and J.P. Morgan Securities LLC and Stifel, Nicolaus & Company, Incorporated are acting as joint book-running managers for the offering.

The securities described above are being offered by Materialise pursuant to a shelf registration statement on Form F-3 (No. 333-226006) previously filed by Materialise with the Securities and Exchange Commission (the “SEC”) and declared effective on July 6, 2018. The offering will be made only by means of a prospectus supplement and an accompanying prospectus. A final prospectus supplement and the accompanying prospectus relating to the offering will be filed with the SEC and will be available on the SEC’s website at www.sec.gov. When available, copies of the prospectus supplement and accompanying prospectus relating to this offering may be obtained from J.P. Morgan Securities LLC at 1155 Long Island Avenue, Edgewood, New York 11717, or by telephone at (866) 803-9204, or by email at  prospectus-eq_fi@jpmorganchase.com or from Stifel, Nicolaus & Company, Incorporated at One Montgomery Street, Suite 3700, San Francisco, California 94104, Attention: Syndicate, or by telephone at (415) 364-2720, or by email at syndprospectus@stifel.com.

This press release does not constitute an offer to sell any securities or the solicitation of an offer to buy any securities, nor shall there be any sale of these securities in any state or other jurisdiction in which such offer, solicitation or sale would be unlawful prior to registration or qualification under the securities laws of any such state or jurisdiction. Any offer, if at all, will be made only by means of a prospectus supplement and accompanying prospectus forming a part of the effective registration statement.

No public offering will be made and no one has taken any action that would, or is intended to, permit a public offering in any country or jurisdiction, other than the United States, where any such action for such purpose is required, including in Belgium.

The transaction to which this communication relates will only be available to, and will be engaged in only with, in member states of the European Economic Area, “qualified investors” within the meaning of Article 2(e) of the Prospectus Regulation (EU) 2017/1129, as amended (the “Prospectus Regulation”), and in the United Kingdom, (i) “qualified investors” within the meaning of Article 2(e) of the Prospectus Regulation amended and transposed into the laws of the United Kingdom law by virtue of the European Union (Withdrawal) Act of 2018 and the European Union (Withdrawal Agreement) Act 2020 (the “UK Prospectus Regulation”), (ii) investment professionals falling within article 19 (5) of the Financial Services and Markets Act 2000 (Financial Promotion) Order 2005, as amended (the “Order”), (iii) persons falling within article 49 (2), (a) to (d) of the Order (high net worth companies, unincorporated associations, etc.) and (iv) other persons to whom it may lawfully be communicated. In accordance with the Prospectus Regulation, no prospectus is required in connection with the transaction described in this communication.

This communication is not for publication or distribution, directly or indirectly, in or into any state or jurisdiction into which doing so would be unlawful. The distribution of this communication may be restricted by law in certain jurisdictions and persons into whose possession any document or other information referred to herein comes should inform themselves about and observe any such restrictions. Any failure to comply with these restrictions may constitute a violation of the securities laws of any such jurisdictions. Materialise assumes no responsibility in the event there is a violation by any person of such restrictions. The aforementioned offering may be influenced by things such as market conditions. There is no guarantee that the offering will occur. This communication does not constitute a recommendation in relation to the offering or the aforementioned securities.

About Materialise

Materialise incorporates 30 years of 3D printing experience into a range of software solutions and 3D printing services, which form the backbone of the 3D printing industry. Materialise’s open and flexible solutions enable players in a wide variety of industries, including healthcare, automotive, aerospace, art and design, and consumer goods, to build innovative 3D printing applications that aim to make the world a better and healthier place. Headquartered in Belgium, with branches worldwide, Materialise has combined the largest group of software developers in the industry with one of the largest and most complete 3D printing facilities in the world.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, and the Private Securities Litigation Reform Act of 1995. These forward-looking statements may include statements regarding the proposed underwritten public offering. Such statements are based on management’s current assumptions and expectations of future events and are subject to a number of risks and uncertainties that could cause actual outcomes and results to differ materially, including: market conditions; Materialise's ability to satisfy closing conditions related to the offering; and other risks set forth in Materialise's most recent Annual Report on Form 20-F, as well as other documents that Materialise files with the Securities and Exchange Commission, including the Registration Statement on Form F 3 (File No. 333-226006) for the offering. Investors are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date hereof. Materialise disclaims any obligation to update these forward-looking statements because of new information, future events or circumstances or other factors.

View source version on businesswire.com: [•]

Source: Materialise

Investor Relations
Harriet Fried
LHA
212.838.3777
hfried@lhai.com


Bram Smits
Materialise
investors@materialise.com



Review Article Be the first to review this article
SolidCAM - See for yourself


Featured Video
Editorial
Jobs
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Service Software Expert-CATIA & CAA for Dassault Systemes at Shanghai, China
Mechanical Engineer for Deeter Foundry at Lincoln, Nebraska
GIS Sales and Business Development for Duncan-Parnell Inc. at Ashland, Virginia
Geospatial Mapping Training and Support Specialist for Duncan-Parnell Inc. at Morrisville, North Carolina
Upcoming Events
RAPID + TCT at McCormick Place Chicago IL - Sep 13 - 15, 2021
WESTEC Online at Online CA - Sep 21 - 23, 2021
3D Collaboration & Interoperability Congress at Golden CO - Feb 21 - 24, 2022
Kenesto: 30 day trial



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise