Geospatial Paradigm Shift or Not? Featured Article By Carl Reed, Chief Technology Officer and Executive Director Specification Program, OGC

Republished from the OGC Newsletter with permission of the Open Geospatial Consortium and Carl Reed

September 6, 2005 -- (OGC Copyright 2005) -- We now hear "paradigm shift" used in the same breath with recent mapping deployments by Google, Microsoft and Yahoo. Do these events signal a paradigm shift happening in the geospatial industry? After all, the "new" capabilities provided by Google, Microsoft, and Yahoo, offer no more functionality than many Web-based applications that have been around since the late 1990’s. What these companies do provide is easy access to content, easy to use "open" APIs, and "cool" interfaces - all wrapped into an advertising business model.

So, what is a paradigm shift? A paradigm is a model or exemplar. The paradigm case is the typical or archetypal case. A paradigm shift is the movement from one paradigm to another.

T.S. Kuhn, in his Structure of Scientific Revolutions (1962), used the term “paradigm” to refer to the conceptual frameworks or worldviews of various scientific communities. Kuhn believed that during periods of "normal science," scientists work within the same paradigm. Scientific communication and work proceed relatively smoothly until anomalies occur or a new theory or model is proposed. Scientists are faced with understanding traditional scientific concepts in new ways and rejecting old assumptions and replacing them with new ones.

Kuhn argued that the progress of science is not gradual, but a kind of punctuated equilibrium, with moments of epochal change. A truly profound scientific breakthrough, Kuhn notes, "is seldom or never just an increment to what is already known. Its assimilation requires the reconstruction of prior theory and the re-evaluation of prior fact, an intrinsically revolutionary process that is seldom completed by a single man and never overnight."

Kuhn referred to these revolutionary processes in science as "paradigm shifts," a term that has now entered the language to describe any profound change in our frame of reference.

Paradigm shifts occur from time to time in business as well as in science. And as with scientific revolutions, paradigm shifts are often hard fought and the ideas underlying them not widely accepted until long after they were first introduced. What’s more, moving to a new paradigm often has implications that go far beyond the insight of their creators, especially in today’s business climate.

Digital GIS and related geospatial technologies have been around since the mid 1960’s. Since then, we have seen changes that have had major impacts on the use of geospatial technology: main frame to minis, minis to PCs, PCs to mobile devices, batch to interactive, command line to GUI, proprietary databases to commercial databases, and most recently the impacts of standards, the Internet and Open Source. Each of these underlying technology shifts and/or deployment platforms have decreased the cost of using geospatial technology, increased the number of users, and brought what we do more and more into the mainstream. Yet, much of the underlying theory and models have remained the same. The underlying science and models related to geodesy, photogrammetry, topology, polygon overlay, routing, and so forth have not changed much since the 1960’s. What have changed are the algorithms and technologies used to implement these capabilities.

However, there is a convergence of forces that is rapidly reshaping our industry - some would say that we are "inside the tornado": standards, service oriented architectures, web services, open source, more easily available content, and internet based consumer applications. If one ignores the current media focus on Google, Microsoft, and Yahoo, and if one asks the question "What is the foundation technology that glues together or enables all of these other forces impacting our industry?, the answer is, "Standards!" Standards promote innovation and competition. Their application is voluntary and therefore does not block or restrict technological progress. On the contrary, they create leeway for innovation. Experience clearly shows that new technical standards often give a foothold to new technologies. Standardization also helps make knowledge about technologies transparent and generally available.

As a result, standardization ultimately determines an organization’s competitive position in an industry. Everyone has the means of participating in an industry and those who use standards at an early stage are often better able to assert their interests and technologies. Standards, therefore, have the ability to reshape both the technology and business competitive landscapes.

For Kuhn, scientific revolutions occur during those periods where at least two paradigms co-exist, one traditional and at least one new. The two paradigms are incommensurable, as are the concepts used to understand and explain basic facts and beliefs for each paradigm. The two paradigm groups operate in different worlds. The movement from the old to a new paradigm he called a paradigm shift.

So, again, the question is whether we are in the midst of a technology paradigm shift? NO! The key is that the traditional GIS community and the new "virtual internet mapping community" are not incommensurable nor do the two groups live in different worlds. What we are seeing is the next evolutionary step in our discipline.

However, we may be in the midst of a business model paradigm shift. The key is whether the traditional business model for geospatial technology development and deployment (long engineering cycle, significant sales and marketing effort) is incommensurable with the open source, "open" (but non-standard) API hacker community, advertising based business model in which new (and free) applications appear on a daily basis. I cannot predict how this will play out. I can say that how the "traditional" business of GIS is done will have to change.

I can also emphatically state that if both communities embrace standards based platforms, architectures, and API’s then the global society will benefit and both communities will be winners. And the paradigm shift will be about the societal impacts and benefits of geospatial technology and not about who wins. To this end, I call on the OGC community -- OGC members and non-members -- to collaborate to leverage, for the benefit of everyone, the energy that is now pervading not just our community but also the much larger consumer community.

Review Article
  • October 09, 2008
    Reviewed by 'Sergio Sperat'
    My impression is that under the scientific introduction of Kuhn's paradigm shift conceptual framework, the author cannot avoid to slip his own (understandable) desires by promoting "open standards" and compliance with industry current practices. That's what OGC pushes for after all.
    Business stories prove time and again that standards are not the name of the game, but rather market acceptance is what declares the winning strategy. PAL vs NTSC, Betamax vs VHS, Napster vs iPod, RISC vs CISC. Will OGC-promoted standards prevail? To me, that's up to the market to decide.

      Was this review helpful to you?   (Report this review as inappropriate)

  • October 09, 2008
    Reviewed by 'Andrew Smith'
    I somewhat agree with Michael in that standards traditionally do not actively promote innovation competition, though a quick look at the Electronics industry would provide a little insight into the "Does Standards = Innovation and Competition" debate. The plugs and cables required to connect a modular audio system setup hasn't changed for many years. Though the introduction of 5.1 dolby surround sound, windows media centre technology and the digital transfer of audio and video, may require an updated in standards.
    To coincide with Sergios comment "market acceptance is what declares the winning strategy" is definately, where the inclusion of a CD/RW drive in computers was initially innovative, and the cost of such devices within a prepackaged computer incurred a large cost 8+ years ago, innovation became industry standard. Try and find a computer that will only read a CD in todays market. I believe that it is that it is a cyclic process. Yes standards provide a level playing field for all those involved to particpate, but the Standards provided by the OGC allow for 'optional' features to be implemented. The purpose of those companies such as Google, Yahoo and Microsoft as well as the Open Source Community, is to experiment with whats possible, to provide new and innovative ways to solve the problems that may arise. The purpose of standards is to adopt the 'feasable solutions' that have become accepted by the marked place, and include them in the base standards.
    Of course there is a point of saturation where base standards are at risk of becoming bloated, but that time is far away for the Online GIS community. After nearly 2 decades, it is comforting to see an evolutionary change that can provide a feasable, 'standards based' solution to interoperability. I agree that it doesn't seem to be a 'paradigm shift' due to GISs close ties with computing theory, rather a greatly accelerated step in evolution. I most definately agree with the concept of a Business Model Paradigm shift. The way the GIS industry does business in regards to data discovery and dissemination will most definately have to change to remain competitive.
    Most good ideas do need encouragement....Bill Gates borrowed the 'windows' idea off the old early 80's (?) LISA (pre-mac) platform and convinced PC users it was a good idea! ;)

      Was this review helpful to you?   (Report this review as inappropriate)

  • October 09, 2008
    Reviewed by 'Michael Cerkas'
    I liked the fact that enough awareness exists 'out there' to recognize the changes that are occurring in the GIS industry. I agree with the author that we are not in a paradigm shift, but simply in a longer evolutionary cycle or phase. Transition is the same for evolutionary or paradigm shift changes, however, the rate or pace is drastically different. The only statement I do not fully agree with the author about is "Standards promote innovation and competition". Although standards provide a level playing field, I believe, to the contrary, that standards, by their inherent nature, provide boundaries and limit innovation. Standards lock out innovation and creativity and promote 'compliance'... Innovation is anything but compliance.... Overall, I believe the author did an excellent job of analysis, raising timely issues and succinctly stating his case. As much as standards provide increased exposure, use and application development, we have not yet seen any true 'innovation' with respect to GIS technology. The paradigm shift is surely out there, waiting to be discovered.

      Was this review helpful to you?   (Report this review as inappropriate)

For more discussions, follow this link …
SolidCAM - See for yourself

Featured Video
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
Service Software Expert-CATIA & CAA for Dassault Systemes at Shanghai, China
Mechanical Engineer for Deeter Foundry at Lincoln, Nebraska
Engineer IV for State of Nebraska at Lincoln, California
Engineer III - Hydraulics for State of Nebraska at Lincoln, California
Upcoming Events
RAPID + TCT at McCormick Place Chicago IL - Sep 13 - 15, 2021
WESTEC Online at Online CA - Sep 21 - 23, 2021
3D Collaboration & Interoperability Congress at Golden CO - Feb 21 - 24, 2022
Kenesto: 30 day trial

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise