Gemini Unveils Industry's Fastest SPICE-Accurate Analog Simulation Technology

FREMONT, Calif.—(BUSINESS WIRE)—October 20, 2008— Gemini Design Automation, a start-up company focused on the challenges of verifying complex analog and mixed-signal designs, today unveiled the industrys fastest SPICE-accurate simulation technology specifically developed to leverage the throughput advantages of multi-core computing. The companys native multi-threaded technology has demonstrated run times and capacity of up to 30x that of earlier generation analog simulators, and up to 10x improvements over first-generation multi-threaded approaches.

The technology has been under development for three years and is being used in several production design environments, as well as benchmarked extensively against state of the art analog simulators, including multi-threaded ones. Combined with low cost multi-core computing platforms and a unique licensing model, Gemini has established a new standard for throughput/cost in a SPICE accurate simulator.

Multi-threading is clearly the way forward to address the performance requirements in analog and mixed-signal design, and Gemini's approach has demonstrated impressive speedup and capacity that is required for large-scale designs in advanced processes, said Dr. Guenter Grau, Managing Director at advICo microelectronics GmbH. We have taped out a significantly complex design in IHPs advanced BiCMOS technology using the tool and simulated one which was unable to converge with a competing simulator. In addition to its throughput, we are pleased with the compatibility it offers with our environment and legacy verification tools.

Gemini was founded in 2005 by a team of analog simulation experts with extensive experience in the EDA industry, notably at Cadence Design Systems and Synopsys, Inc. The core team consisting of Dr. Baolin Yang and Dr. Xiaodong Zhang have been involved with the development of several successful SPICE simulators and analog design environments. They are backed by EDA industry pioneer, co-founder of Cadence, and EDAC Phil Kauffman Award winner James Solomon, considered to be the foremost authority on analog design technology.

There are number of trends that Gemini is addressing with its ground up fully parallelized approach, not the least of which is the increasing percentage of analog and mixed-signal content on todays SOCs. Related to that is in an exponential increase in the number of parasitics, particularly as process nodes scale. Designers therefore need a solution that can scale with the size and complexity of designs and reduce the bottleneck that verification has become, said Solomon, who serves as the companys Executive Chairman.

We started three years ago with a multi-threading and parallel computation approach that now delivers significant performance improvements, and can leverage the availability of low cost multi-core computing platforms. Today, multi-threading has been validated by the industry, but ours is unique in that it is the industrys most comprehensive and thorough implementation with break-through parallel matrix computation technology at its core, further commented Solomon.

The Gemini simulation technology was holistically designed to leverage the advantages of multi-core platforms, specifically in its architecture and proprietary algorithms, and the comprehensive implementation of multi-threading model evaluation, matrix solving and the parallelizing of other computationally important components of the simulator. It is a fully threaded application. Its performance scales roughly linearly with additional cores and its matrix computation time scales roughly linearly with size and complexity of circuit matrices, making it especially effective for large designs with high parasitic count. In customer benchmarks, it has consistently performed 2x-10x faster than other multi-threaded SPICE accurate simulators.

We set as an initial goal, in addition to delivering the industrys best throughput/cost solution, making this one of the industrys most robust simulation products. Great emphasis was placed on the ability to accept industry standard netlist formats, delivering the broadest range of model support, simple out of-the-box user operation, and achieving better convergence than FastMos or other SPICE accurate products, commented Dr.Yang.

The product is the ideal solution for complex functions such as PLLs, ADCs and DACs, charge pumps, programmable Tx/Rx chains, power distribution circuitry, and memory IP, particularly where there are a large number of extracted post-layout parasitics which require exhaustive verification prior to tapeout. It runs on standard X86 SMP multi-core platforms equipped with 64bit Linux operating systems.

Initial production product availability is scheduled for fourth quarter 2008.

About Gemini Design Automation

Gemini Design Automation is focused on the challenges of verifying large complex analog and mixed signal designs. It has developed the industrys fastest native multi-threaded approach to SPICE-accurate simulation, delivering more throughput and capacity and lower cost of ownership. Founded in 2005 by experienced analog tool developers, the company is backed by EDA pioneer Jim Solomon. It is based in Fremont, California. More information can be found at

1 | 2  Next Page »

Review Article Be the first to review this article
Featured Video
Latest Blog Posts
Industry ExpertsMCADCafe Editorial
by Industry Experts
MCADCafe Industry Predictions for 2022 – Alpha Star
Industry ExpertsMCADCafe Editorial
by Industry Experts
MCADCafe Industry Predictions for 2022 – BMF
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Structures Retrofit Engineers for Boeing at Seal Beach, California
Program Manager for L3Harris at Melbourne, Florida
Mid-Level Landscape Architect/Designer for Studio-MLA at Los Angeles, California
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
GIS Specialist for City of Ithaca at ithaca, New York
Upcoming Events
3DEXPERIENCE World 2022 at Georgia World Congress Center Atlanta GA - Feb 6 - 9, 2022
3D Collaboration & Interoperability Congress at Golden CO - Feb 21 - 24, 2022
SIAF Guangzhou 2022 at China Import and Export Fair Complex Guangzhou - Mar 3 - 5, 2022
Additive Manufacturing Users Group Education & Training Conference at Hilton Chicago Chicago IL - Apr 3 - 7, 2022

© 2022 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise