Mentor Graphics DFT Tools Adopted by STMicroelectronics for Advanced IC Testing Solutions

WILSONVILLE, Ore.—(BUSINESS WIRE)—January 26, 2009— Mentor Graphics Corporation (Nasdaq:MENT) today announced that STMicroelectronics has adopted the TestKompress® automatic test pattern generation (ATPG) product into its standard 65nm and 45nm design kits. The new test flow will enable high-quality scan-based production testing for applications such as automotive, cellular infrastructure, and imaging.

“We’re benefiting from a very fruitful collaboration to incorporate Mentor Graphics’ Design-For-Test (DFT) technology into our advanced nanometer design flows starting at 65nm and below,” said Roberto Mattiuzzo, Digital Test Solutions manager of STMicroelectronics’ Technology R&D, Central CAD & Design Solutions. “With new failure mechanisms at advanced nodes, limitations on IC pins available for testing, and the need to employ better self-test in the field, the range of emerging testing requirements has significantly increased. We are therefore pleased to add Mentor Graphics in the portfolio of EDA solutions supported by STMicroelectronics in the Design-For-Test area.”

The move to smaller geometries introduces new subtle failure mechanisms that can be missed by relying solely on traditional scan testing using only static fault models. Applications that demand the highest quality devices require additional test patterns that specifically target these new failure mechanisms. STMicroelectronics employs a variety of manufacturing tests including timing-aware at-speed tests and layout-aware bridging tests to ensure the quality of their semiconductor products. Mentor’s TestKompress compression technology allows these additional tests to be added while at the same time reducing test data volume and test time. STMicroelectronics is also using Mentor DFT tools to add in-system testing to its high-reliability products to enable a fast check of system integrity and simplified trouble-shooting in the field.

“We have taped out a 65nm design with production testing employing Mentor’s TestKompress product, which enabled us to meet our rigid target in terms of test coverage,” said Angelo Oldani, Design Group Director in Communication Infrastructure Division of Computer and Communication Infrastructure product group, STMicroelectronics. “Mentor’s strong cooperation and support also helped us to use the LBISTArchitect product to add logic built-in self test (LBIST), allowing device testing in the real application to ensure reliable operation in demanding end-product applications.”

The high compression capabilities of TestKompress can also be used to implement a low-pin count testing strategy, enabling high-quality tests to be applied to a wide variety of components including system in package (SiP) devices with limited pads for testing. Low pin count testing can also be used to enable multi-site testing to increase test throughput. “We’re using the high compression advantages of TestKompress to meet our need for very low pin count testing on our imaging ICs,” said Jocelyn Moreau, DFT Manager in the Imaging Division, Home Entertainment & Displays group, STMicroelectronics. “We were able to achieve our test coverage and quality goals with as few as three digital pins available on these devices. This approach is accelerating the adoption of high compression scan testing for future designs.”

Mentor’s DFT product line, the market share leader in digital IC testing, provides a complete solution for advanced digital IC production testing, including scan-based test and BIST logic insertion, ATPG, test pattern debugging, and test failure diagnosis. Mentor’s award-winning and patented Embedded Deterministic Test (EDT) technology provides the highest test pattern compression available, addressing the critical requirements of advanced SoC nano-scale designs. Mentor’s DFT product line is also the market share leader in digital ATPG.

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ:MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 months of about $850 million and employs approximately 4,450 people worldwide. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site:

(Mentor Graphics and TestKompress are registered trademarks of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)


Mentor Graphics
Gene Forte, 503-685-1193
Email Contact
Sonia Harrison, 503-685-1165
Email Contact

Review Article Be the first to review this article
Featured Video
Latest Blog Posts
Joseph LopezPROSTEP INC Blog
by Joseph Lopez
OpenPDM MIGRATE supports Windchill Bulk Migrator
Roberto FrazzoliMCADCafe Editorial
by Roberto Frazzoli
A closer look at CCE’s EnSuite – Cloud ReVue LiveLink
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
GIS Specialist for Schneider Geospatial at Indianapolis, Indiana
ASIC Architects and Hardware Engineers at D. E. Shaw Research for D. E. Shaw Research at New York, New York
Assistant Professor in Applied GIS for University of San Diego at San Diego, California
Senior Highway Engineer for RS&H at Jacksonville, Florida
Upcoming Events
Canadian Manufacturing Technology Show 2021 at The International Centre (Hall 2) 6900 Airport Road Mississauga, Ontario L4V 1E8 Canada - Oct 4 - 7, 2021
Houstex 2021 at George R. Brown Convention Center Houston TX - Oct 5 - 7, 2021
Autodesk University 2021 | Free digital conference at United States - Oct 5 - 14, 2021
HxGN Live Design & Engineering 2021 - Virtual at United Kingdom - Oct 12 - 14, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise