SMIC and Cadence Announce the Availability of 65-Nanometer Low Power Reference Flow 4.0

Fully Integrated Power-Efficient Flow Enables Fast, Easy Design of Low-Power Leading-Edge Devices

SAN JOSE, Calif., Oct. 29 /PRNewswire-Asia-FirstCall/ -- Cadence Design Systems, Inc. (NASDAQ: CDNS), the leader in global electronic design innovation, today announced that it has delivered a comprehensive low-power design flow for engineers targeting the 65-nanometer process at Semiconductor Manufacturing International Corporation (NYSE: SMI). Based on the Cadence(R) Low-Power Solution, the flow enables faster design of leading-edge, low-power semiconductors using a single, comprehensive design platform.

"Power is now a critical design constraint, as important as timing and area from both a technology and cost standpoint," said Max Liu, Vice President of the Design Services Center at SMIC. "The SMIC-Cadence Reference Flow 4.0 addresses the need for power-efficient design innovation with an advanced, automated low-power design capability."

Validation of the flow was accomplished through implementation of low-power chips utilizing SMIC's in-house-designed 65-nanometer libraries, including effective current source model (ECSM) standard cells, power management cells, PLLs, SRAMs and I/O libraries. Low-power technologies employed in the design include power gating and multi-supply/multi-voltage (MSMV) techniques to reduce leakage and dynamic power consumption.

"Power efficiency is a key requirement for many new semiconductors, yet designers sometimes think it's too new and therefore too risky," said Steve Carlson, vice president of product marketing at Cadence. "The Cadence Low-Power Solution provides a complete, silicon-validated front-to-back flow for designers targeting SMIC's 65-nanometer process technology, including functional and structural verification, while increasing productivity. It's fast, easy and proven."

The SMIC 65-nanometer low-power Reference Flow 4.0 includes the Cadence Low-Power Solution, with Encounter(R) Conformal(R) Low Power, Incisive(R) Enterprise Simulator, Encounter RTL Compiler, Encounter Digital Implementation System, Cadence QRC Extraction, Encounter Timing System and Encounter Power System.

About SMIC

Semiconductor Manufacturing International Corporation (NYSE: SMI) is one of the leading semiconductor foundries in the world and the largest and most advanced foundry in Mainland China, providing integrated circuit (IC) foundry and technology services at 0.35um to 45nm. Headquartered in Shanghai, China, SMIC has a 300mm wafer fabrication facility (fab) and three 200mm wafer fabs in its Shanghai mega-fab, two 300mm wafer fabs in its Beijing mega-fab, a 200mm wafer fab in Tianjin, a 200mm fab under construction in Shenzhen, and an in-house assembly and testing facility in Chengdu. SMIC also has customer service and marketing offices in the U.S., Europe, and Japan, and a representative office in Hong Kong. In addition, SMIC manages and operates a 200mm wafer fab in Chengdu owned by Cension Semiconductor Manufacturing Corporation and a 300mm wafer fab in Wuhan owned by Wuhan Xinxin Semiconductor Manufacturing Corporation. For more information, please visit http://www.smics.com .

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software and hardware, methodologies, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available at http://www.cadence.com .

Cadence, the Cadence logo, Incisive, Encounter and Conformal are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

    For more information, please contact:

     Dan Holden
     Cadence Design Systems, Inc.
     Tel:   +1-408-944-7457
     Email: holden@cadence.com

     International Media
     Beverly Liu
     SMIC Investor Relations
     Tel:   +86-21-3861-0000
     Email: Beverly_Liu@smics.com

     China Media
     Angela Miao
     SMIC Public Relations
     Tel:   +86-21-3861-0000
     Email: Angela_Miao@smics.com

Web site: http://www.smics.com/
http://www.cadence.com/




Review Article Be the first to review this article
Featured Video
Editorial
Latest Blog Posts
Joseph LopezPROSTEP INC Blog
by Joseph Lopez
OpenPDM MIGRATE supports Windchill Bulk Migrator
Roberto FrazzoliMCADCafe Editorial
by Roberto Frazzoli
A closer look at CCE’s EnSuite – Cloud ReVue LiveLink
Jobs
Service Software Expert-CATIA & CAA for Dassault Systemes at Shanghai, China
Product Design Engineer - Softgoods for Apple Inc at Cupertino, California
Director, Industrial Machinery Solutions- SISW PLM for Siemens AG at Livonia, Michigan
Mechanical Engineer II for Aehr Test Systems at Fremont, California
Mechanical Engineer in HVAC – Mid-Level for Gordon Prill, Inc at Sunnyvale, California
Construction Project Manager for Gordon Prill, Inc at Sunnyvale, California
Upcoming Events
The Design. Engineer. Build. Conference at Anaheim Convention Center Anaheim CA - Aug 10 - 12, 2021
RAPID + TCT at McCormick Place Chicago IL - Sep 13 - 15, 2021
WESTEC Online at Online CA - Sep 21 - 23, 2021
Houstex 2021 at George R. Brown Convention Center Houston TX - Oct 5 - 7, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise