The resurgence of manufacturing following the crash of 2008 is unprecedented. The most current U.S. manufacturing technology orders put the year-to-date total at $463.32 million, which is up 80.5% compared with 2010 and are the second highest dollar amount in the last 15 years. As of October, manufacturing technology orders had already surpassed the total value accumulated in 2007.

“It’s long been recognized that analysis of manufacturing technology orders provides a reliable leading economic indicator, as it is an indicator that manufacturing firms are investing in capital equipment to increase their capacity and improve productivity. Manufacturing technology provides a foundation for all other manufacturing,” said Douglas K. Woods, President of AMT – The Association For Manufacturing Technology. “These machines and devices are the equipment that turn raw materials such as steel, iron, plastic, ceramics, composites, and alloys from their original state as stock materials into what will become durable goods such as airplanes, cars, and appliances, as well as consumer and other goods that are used every day.”

The Midwest and Central regions of the U.S. have seen the greatest surge in manufacturing technology orders. The Midwest’s manufacturing technology orders in 2011 are 105 percent more than the comparable figure for 2010. This large increase is the result of the region’s large traditional customer base.

It is also where the oldest equipment resides and the industries impacted most by the weak dollar and reshoring trend are located. The Central region pick-up — 85 percent higher compared to 2010 — was powered by the growth in the energy business and secondly by the automotive industry.

Beyond manufacturing technology, overall U.S. manufacturing is robust. Despite the past several years trend of offshoring, the value of U.S. manufacturing output increased by one-third to $1.65 trillion between 1972 and the 2008 recession. Even though China accounted for 19.8 percent of global manufacturing value in 2010, the U.S. was strong with a share of 19.4 percent. 

“The factors that are fueling this tremendous surge are the traditional reasons that drive growth in investment, but what is unusual about the current rebound is that all factors have come together at one time. This is something that’s never been seen before and as a result we are seeing a true renaissance for manufacturing in the U.S.,” Woods noted. 

“American manufacturers rushed to beat the end-of-year bonus depreciation deadline. Inventories were low – something we’ve never experienced going into a recession – and that accounts for the quick rebound,” he explained. Exports are rising as American manufacturers meet overseas demand. Manufacturing technology from the U.S. is less expensive than foreign equipment, and U.S.-made goods are more price competitive than many imports due to the weak dollar.

The average age of machinery currently in use at U.S. manufacturing facilities crept up from nine years in 2007 to 13.5 years, and as demand started to increase the need for investment to replace the aging equipment became apparent. Those investments are being made in completely new technology. Multi-operation machines are profoundly impacting productivity. Water jet cutting and hydroforming are experiencing massive growth because they offer all the benefits of traditional processes but eliminate distortion and deformation. Additive manufacturing is growing, nano machining has become commercially affordable, and the availability of new materials, such as compact powdered metals, is having a tremendous impact. Plus, the emergence of cloud manufacturing, which promotes collaborative efforts across organizations, is opening new doors to manufacturers.

Expanding markets worldwide are playing an important role as manufacturing grows China seems insatiable and accounts for almost one half of the world’s total consumption of manufacturing technology. India’s economy is growing at double the Western economy’s rate, with expectations for more China-like development soon. As it prepares for major world events including the Olympics and the FIFA World Cup competition, South America faces the challenge of building infrastructure that can support the events.

Russia, South Africa, the Middle East and South Asia are on the fringe, but nevertheless contribute to growth in the global manufacturing economy.

Another factor boosting U.S. manufacturing is the reshoring phenomenon. More work is coming back to the U.S. from foreign shores and there is greater foreign direct investment in U.S. facilities. The quality of work in the U.S. is proving to be more valuable than originally thought in the off-shoring investment calculation. Companies face increasing costs in logistics issues with the delivery of components and the exporting of completed products to North America. Add to that the rapidly increasing labor costs in traditionally “low-cost” labor markets, and the continued decline of labor in the overall share of total production cost, and the reshoring picture becomes clear. “When the the total cost of manufacturing is calculated, the U.S. is a very favorable environment,” Woods notes.

“In fact, new research from the Boston Consulting Group shows that transportation goods such as vehicles and auto parts, construction equipment, appliances, electrical equipment and furniture are among the sectors that could create up to 3 million job as a result of manufacturing returning to the U.S.,” Woods says.

The outlook for 2012 remains positive. The weak dollar is making exports strong. Reshoring is in full bloom. The manufacturing base is reinvesting in the latest tools. Energy will continue to be a large investor in manufacturing technology. The automotive industry is making major changes to address green issues, which will lead to significant investments in production technology, as well as spending to support the shift of the industry’s center from Detroit to the South/Southwest.  Aerospace green field investments will continue in the Southeast and West.

Woods says, “This all said, manufacturing in America still needs help. Jobs are an unresolved issue. Despite the high number of Americans out of work, manufacturing jobs continue to go unfilled. That is because the factory floor today is very different from what it used to be. It is awash with new technologies and processes that require advanced training and adaptable skills. We need a “smartforce” of workers who are up to the job.

“Until we take steps to level the playing field for U.S. companies in the global marketplace by eliminating trade barriers, reining in regulations, and lowering taxes for manufacturers, we risk losing ground to our foreign competitors in new markets and industries. We must keep the pressure on our elected officials to come up with a focused plan for moving forward. AMT is poised to work with the Federal Government to implement a national manufacturing strategy – a Manufacturing Mandate that will establish America as the worldwide leader in next-generation manufacturing technologies and the world-class products and services they provide. Continued growth in our manufacturing sector is a necessary step on the path to sustainable economic prosperity and worldwide leadership and only achievable through the concerted, collaborative efforts of the stakeholders.”

 

Commentary By Jeffrey Rowe, Editor

We begin the new year with what appears to be good news for the manufacturing sector specifically and the economy generally. I wonder, though, are better days really ahead for manufacturing?

For the past few months I have been trying to absorb the implications of economic and business reports and analyses that focus on the relative state of U.S.  manufacturing. I've also read interviews with senior executives about the business climate, including small, medium, and large, multinational  manufacturing companies (mostly big ones), as well as their peers in a cross-section of all other business sectors.

Generally, manufacturing executives forecast increases in economic growth,  investments in new equipment and technology, and hiring in the next 12 months. A majority of manufacturing executives report that their revenues grew last year, especially in the second half. Looking ahead, most manufacturers are optimistic about the economy's prospects over the next 12 months.

Although generally optimistic, manufacturing executives do cite some barriers to growth that will be monitored closely in the coming year. Many manufacturers view foreign market competition as a potential barrier to growth, as well as unfavorable monetary exchange rates, not to mention the mess with several currencies around the world. In addition, there is a potential drawback from the current increase in hiring plans, and many manufacturers forecast a lack of qualified workers as a hurdle for growth over the next 12 months. With all the recent layoffs, however, this last concern seems hard to fathom until you realize the importance of the word “qualified” with regard to necessary education, not just mindless warm bodies.

So, despite the ongoing layoffs occurring in manufacturing throughout North America, there is some reason for optimism in the manufacturing sector right now, at least in the minds of those interviewed. Although manufacturing companies are not the exclusive source of the information presented in the reports I read, that sector represents a fair sampling of the current collective mindset for manufacturing. However, only relatively large manufacturing companies were interviewed in a majority of the reports I've read, so the views are skewed toward the opinions of larger manufacturers.



You can find the full MCADCafe.com event calendar here.

To read more news, click here.


-- Jeff Rowe, MCADCafe.com Contributing Editor.