“Looking at three Industry Market Barometers over the last 18 months, we’ve seen a winning formula unfold. Those companies that reported deploying new strategies, such as new product development and online marketing, have propelled to growth mode. Buoyed by the results of their initiatives, these successful companies are moving to the next level, fueling industry’s recovery,” said Eileen Markowitz, President, ThomasNet.
ThomasNet’s IMB is a semi-annual survey of the buyers (engineers and purchasing agents) and sellers (owners, managers, sales and marketing executives) in the manufacturers, distributors and service companies that comprise the industrial sector. It measures company growth, decline, strategies used to succeed, and the segment outlook. This is the third consecutive IMB, tracking industrial companies since January 2009. Its data is unique as the majority of respondents are from small and midsized companies, mirroring the makeup of the industrial/manufacturing sector. More than 3,243 industry professionals participated in the latest IMB.
Quickening Growth; Fewer Declines
One key indicator is the dramatic increase in companies reporting growth over the past 18 months: For the period January through June 2009, during the heart of the national recession, only 17 percent of respondents reported growth.
The figures began to steadily improve, with 27 percent reporting growth for July through December 2009, building to the latest figures, where 45 percent of respondents say their business grew during the first half of 2010. Those reporting a decline in business performance is just as telling. Only 19 percent of respondents report decline over the first half of 2010, down significantly from 41 percent six months ago and 54 percent when the IMB was first fielded.
The respondents also report a sense of optimism. Indeed, 60 percent of respondents forecast growth for the remainder of 2010, and 83 percent of those that are already growing expect that expansion to continue.
New Job Creation; Layoffs Nearly Over
The growth of industrial companies is leading to the creation of new jobs, with 34 percent of respondents saying they plan to hire again this year. The kinds of jobs companies are adding also indicate more growth ahead. For example, 25 percent of firms with new openings are adding line workers, an indication of increased product demand. Twenty-three percent are adding sales and marketing staff, showing confidence in customer buying power. Nineteen percent are recruiting engineers, supporting stepped up product development.
While many companies are adding new jobs, the IMB also shows layoffs winding down. Nearly 60 percent of respondents plan to keep headcount level this year, and only eight percent plan to downsize.
In previous Industry Market Barometers, ThomasNet found that companies were investing in areas such as product development in order to seed growth. Putting the recession behind them, they are ramping up for new growth, with investments in technology (40%), facilities/renovations (37%) and capital equipment (36%) for the second half of 2010. And, in the first half of 2011, technology is projected to be the dominant area of investment.
Strategies for Continued Success
Respondents also share their top four strategies for continued success: developing business in new US geographies, developing innovative products and services, pursuing business in new industries, and increasing online marketing.
“Our sales are up 37 percent over the same period last year, and we’ve set four successive months of sales records,” said Richard Rubin, President of Maxi Container, Detroit, a distributor of eco-friendly containers for industrial and commercial use.
“More attention to online marketing and sales has allowed us to penetrate new markets and seed demand for new products. I am optimistic that this approach will lead to our best year ever.”
Small Businesses Ignite Industry Growth
In addition to examining the industrial sector, the IMB also paints a picture of a growing small and midsize business (SMB) sector. The largest increase in business comes from these smaller companies.
“The success of smaller suppliers is revving up the industrial supply chain, and igniting industry as a whole,” said Eileen Markowitz. “Their growth is fueling the expansion of the companies that buy from them—leading to increased innovation, decreased time to market, and additional hiring.”
Much of that hiring will continue to remain in North America, where respondents’ operations are located. Only 27 percent report that they have manufacturing operations overseas—and of those, 47 percent plan to make no changes, and 18 percent are making a concerted effort to move manufacturing back to the US.
To view and download the full results of the Industry Market Barometer, go to: www.thomasnet.com/pressroom/Industry_Market_Barometer.
ThomasNet helps companies in the industrial marketplace to increase sales, and serve their customers more efficiently.
For more than 110 years, ThomasNet (previously Thomas Register) has connected buyers and suppliers of industrial products and services to do business with one another. The company’s flagship offerings are ThomasNet.com® and Web Solutions™ both designed to provide industrial buyers with all the tools and functionality they need to make intelligent buying decisions online. With more than two million visits per month, ThomasNet.com is the preferred resource for buyers and engineers from Fortune 500 companies, government agencies, the military, institutions and more looking to specify and purchase parts, materials, components, equipment and more. Web Solutions helps industrial companies leverage Internet technology(ies) to improve the performance of their websites and achieve their business goals. At the core of each Web Solution is the Navigator Platform, Thomas Industrial Network’s proprietary technology.
Commentary By Jeffrey Rowe, Editor
As opposed to the constant and ongoing “doom and gloom” most media gives the manufacturing/industrial sector, this survey unveils some encouragement for the future.
The fact that the survey had over 3,000 respondents is impressive, as is the fact that a large percentage of them were in areas highly populated with manufacturers – the Midwest and Mid-Atlantic. Makes sense, as well as the fact that the majority of respondents were manufacturers and from small businesses, the latter being a good indicator on what’s really happening in the manufacturing sector.
The survey shows that there are some preliminary signs and momentum of a domestic manufacturing recovery trending toward further expansion to come. Almost half of the respondents said their businesses grew in the first half of 2010, over half forecast growth for the remainder of 2010, and just over 1% expected a decline.
Developing innovative, new products was one of the major factors and strategies for companies moving in a positive direction, and more than half considered this critical. Not too surprising, but the offshoot is that new product development will require an increase in designers, engineers, and line workers. The requirement for additional designers and engineers is, of course, welcome news for MCAD, other technical software, hardware, and associated service vendors.
Finally, in addition to showing that the manufacturing/industrial sector as a whole is growing, the fact that small- and mid-size businesses show the largest increases in business is very encouraging.
I encourage you to check out the full results of the survey so you can judge for yourself the current and possible future state of manufacturing. Based on the survey results, better days are possibly ahead, and that’s really good news. Based on the survey, is a recovery in manufacturing guaranteed, absolute, or unbridled? Of course not, but there are definitely some encouraging signs.
The Week’s Top 5At MCADCafé we track many things, including the stories that have attracted the most interest from our subscribers. Below are the five news items that were the most viewed during last week.
IMTS – The International Manufacturing Technology Show 2010 Sets the Stage for a Strong Comeback in Manufacturing
Strong results at IMTS – The International Manufacturing Technology Show 2010 signal a strong comeback in manufacturing. Total registration for the six-day event, which ran from Sept. 13-18 at McCormick Place in Chicago, was 82,411. IMTS covered 1,137,375 square feet of exhibit space with 1,728 companies exhibiting in 1,180 booths. Event management said, “Customers came with very specific objectives and were looking for solutions to make them more productive.” “Sold” signs on machines also could be seen throughout the show. Along with the healthy traffic on the show floor, other highlights for attendees and exhibitors included the Emerging Technology Center, the Advanced Manufacturing Center, the re-invented Industry & Technology Conference, a Manufacturing Museum, and the National Institute for Metalworking Skills (NIMS) Student Summit. This year, IMTS management hosted the first-ever Industry Inspiration Day to kick-off the all-new IMTS Industry & Technology Conference. On Monday, renowned experts from the aerospace, medical, automotive and energy industries presented the keynote program on manufacturing innovation to an overwhelming audience of manufacturing professionals. From Tuesday through Friday, conference participants attended sessions that explored five topic tracks including materials engineering, machining technology and trends, alternative manufacturing processes, metrology and plant operations. IMTS 2012 will run Sept. 10-15, 2012.
Tesla Motors Selects Dassault Systemes' V6 PLM Solution
Dassault Systemes announced that electric car manufacturer Tesla Motors has committed to Dassault Systemes' V6 PLM. Tesla is beginning its upgrade to V6 with implementation of the ENOVIA V6 collaboration solution. Improvements and predefined templates in the latest ENOVIA release have enabled a successful pilot of the core solutions in just over a month, paving the way for a successful production implementation. Tesla is working with Dassault Systemes' partner Idex Solutions to migrate Tesla's IP and management processes to the ENOVIA V6 environment. Phase two of the implementation will involve the launch of the DELMIA digital manufacturing solution in late 2010. Future phases will migrate Tesla's product authoring solution from CATIA V5 to CATIA V6. Additionally, Tesla is using the CATIA ICEM solution for Class A surfacing, DELMIA Human for occupant ergonomics, plus solutions from Dassault Systemes software partners. Tesla initially selected Dassault Systemes' CATIA PLM Express and ENOVIA SmarTeam over competitive solutions in 2007. Since then, Tesla has piloted numerous Dassault Systemes software and partner solutions, leading to today's enhanced relationship for the development of the upcoming Model S sedan.
Actify Announces Open-Source Solution on SharePoint 2010 for Enterprise Collaborative Product Development
Actify announced the introduction of an open source SharePoint-based solution developed in collaboration with Aras, Razorleaf, and Microsoft. The Collaborative Product Development (CPD) solution enables product data assets normally constrained within a Product Lifecycle Management (PLM) or Product Data Management (PDM) system to be shared throughout the enterprise and to its customers, suppliers, and partners globally, improving collaboration and cycle times by fostering speed to decision -- visually. The CPD solution combines the capabilities of Actify's DesignShare, including a new Silverlight based 3D viewer, and Aras' Innovator suite by utilizing SharePoint Server 2010 Business Connectivity Services, PerformancePoint services, workflow, and search to form an end-to-end companion for PLM and PDM. To realize the project, Microsoft brought together a team of specialists, including Actify, Aras, and systems integration firm Razorleaf Corporation, who specialize in the integration of SharePoint to PLM and PDM applications. The solution is available on Microsoft 's Codeplex open source community at www.codeplex.com/plm.
Delcam claims IMTS success proves US recovery is under way
"Anyone who doubts that the recovery in US manufacturing is happening should have been at IMTS,” claimed Delcam’s North America President, Glenn McMinn, when the exhibition closed last week. He reported that the booth had generated more enquiries, from a higher-quality audience, than any previous show in the series of biannual events. "After the recent recession, companies are looking to invest again,” he said. Delcam’s full range of CAM systems is now made up of PowerMILL for high-speed and five-axis machining, FeatureCAM for feature-based machining, PartMaker for Swiss-type lathes and turn-mill equipment, and ArtCAM for routing and engraving. Together, the complete set of programs comprises the world’s most comprehensive collection of machining software; giving Delcam an unrivalled ability to provide solutions to all of a company’s programming needs. Earlier this year, Delcam further extended its range with the addition of its first integrated CAM system, Delcam for SolidWorks.
ZWCAD Selects Siemens PLM Software’s D-Cubed Constraint Solver for Intellicad-Based Application
Siemens PLM Software and ZWCAD Software announced the licensing by ZWCAD of Siemens PLM Software’s D-Cubed software for use in ZWCAD Professional software. With more than 180,000 users worldwide, ZWCAD Professional is the first application based on the IntelliCAD software targeted for integration with the D-Cubed 2D DCM (Dimensional Constraint Manager). It offers comprehensive design and drafting capabilities, drawing (dwg) file import/export, and extensive application programming interfaces that support a growing community of partner applications. ZWCAD Software is a member of the IntelliCAD Technology Consortium and Open Design Alliance. The 2D DCM is offered to members of these organizations with the 2D DCM Teigha software wrapper, an interface that can help them integrate the 2D DCM rapidly into their applications.
Jeffrey Rowe is the editor of MCADCafé and MCAD Weekly Review. He can be reached at Email Contact or 408.850.9230.
Product and Company News
Luxion Releases KeyShot 2.1
Autodesk Launches Web and Mobile Access to AutoCAD Designs
RAND North America Relaunches as Inceptra; Expands Operations
Vericut NC simulation software takes off
Dassault Systèmes' 3DVIA Adds Drag and Drop Stereoscopic 3D to Free Development Environment
Tech Soft 3D Releases HOOPS 3D Exchange v3.0
PearlLED Designs Cool, Green Lightbulbs with Autodesk Inventor Software
Celeritive Technologies and Geometric Enter into an Agreement to Integrate VoluMill with CAMWorks
Seiki Systems eradicates lost machining time
Autodesk Introduces Free Sustainability Resources for Engineering Students, Educators
Océ Adds Canon Products That Enhance Workgroup Communication
Tech Soft 3D and Actify Announce First Commercial Application to Feature HOOPS 3D Exchange Technology
Talgo Selects MSC.Software CAE Solutions for the Virtual Prototyping of High Speed Train
QuadriSpace's new 2011 release offers desktop solutions with enterprise results
Draftware Releases DV-CADDS Reader 2.0
Rapid Prototyping Leader Quickparts Announces New Capabilities for CNC Machining of Large Part Designs
Inceptra Unveils PLM 2.0 Discovery Offering PowerUP
Snecma Standardizes on ANSYS Workbench Technology
Subscription Advantage Packs Now Available for Autodesk 2011 Software Releases
Catalog Data Solutions Catalog, CAD Download and eCommerce Solution Selected by GAM, Inc.
GEOMATE unveils GrafiCalc 2011 pre-CAD mechanical CAE software
New SyncroFIT 2010 Reduces Time to Design Airframe Assemblies by as Much as 70% Compared to Manual Methods
Delcam adds turning and mill-turn to integrated CAM for SolidWorks
MecSoft Corporation Partners with SolidWorks VAR in Brazil
PLMIG Announces "PLM In The USA" Initial Findings
Wheelchair Design Breakthrough Wins $20,000 Grand Prize in Global Design Contest
Delcam partners with CADENAS for free 3D CAD part catalogues
Vericut gets big in Brazil
Taser Is Sued by Inventor James McNulty for Patent Infringement.
NASA Invites Virginia Students to Become 2011 Aerospace Scholars
CAD Schroer introduces STHENO/LX – Intelligent, dynamic 2D drafting for Linux and Windows
Need zero cost DWG file compatibility? DraftSight
Delcam's FeatureCAM gives faster prototypes
Precision at 6,000 Metres Under the Sea
Senergy Group to Improve Energy Exploration with Realistic Simulation from Dassault Systèmes
Femco Receives API Certification for Gas & Oil Component Manufacturing
Think3 Inc. Has Joined the Family of Versata Affiliated Software Companies
MSC.Software Wins Readers Choice Award From China Information World
Creaform launches VXelements, its all-in-one 3D data acquisition software
MecSoft Corporation Partners with Tecnia S.A.
QMS Debuts RealTime Process Monitoring for EnterpriseIQ Manufacturing ERP Software
Irkut Corporation Selects Siemens PLM Software Solutions to Launch New MC-21 Airliner
Avatech Solutions Reports Earnings for Fiscal 2010
From Trash Can to Gas Can: Rising Star in Green Energy Arena Gets Technology/Manufacturing Boost from Industry Giants
Draftware Adds New Reseller in France
Related MCAD News
mental images’s iray Renderer Incorporated into Autodesk 3ds Max Products
American Axle & Manufacturing Announces Formation of e-AAM Driveline Systems AB
Ball Aerospace Awarded JPSS-1 Satellite Contract
CAE Announces Contracts for world's first two Airbus A350 XWB full-flight simulators, Airbus simulator upgrades, and Boeing 777 FFS for North American customer
Research and Markets: 2009 - 2010 Demand Trend Analysis of the U.S. SMB Collaboration Solutions Market
IBM Introduces New Cloud Collaboration Services
Autodesk Selects QlikView as Worldwide Enterprise Standard Business Intelligence Dashboard Solution
Ball Aerospace NPP Weather Satellite Passes Pre-Environmental Review
Boeing Marks Construction Milestone on South Carolina 787 Final Assembly Building
Autodesk Announces Autodesk Plant Migration/Conversion Program for CADWorx Customers
Ball Aerospace Satellites Provide Double-Coverage for NASA's EPOXI Mission
Intergraph Releases SmartPlant 3D Materials Handling Edition Software to Automate Design of Bulk Facilities
Ball Aerospace Contributes to Instruments for NASA/ESA Mars Mission
Cloud Computing Company Offers Document Exchange and Collaboration Between Amazon S3, Google and Microsoft SharePoint
James Heppelmann Assumes Role of CEO at PTC
Steve Chalgren Joins Arena Solutions as Vice President of Product Management and Strategy
Distinguished Academic Leader to Serve as WPI’s Inaugural Dean of Engineering
Lee Cunningham joins Majenta PLM sales team
HP Names David Scott to Lead HP StorageWorks
Ameri-CAD Premieres VisionREZ 2011 at BCMC Trade Show
Delcam to launch feature-based programming at Vienna-Tec
Register Now for Third Annual KETIV Autodesk Manufacturing Academy
Geometric to showcase solutions for maximizing ROI from PLM at Siemens PLM Connection 2010
Delcam to launch FeatureCAM 2011 at BIMU
Omnify Software Speaking on ERP and PLM Collaboration at Consona Connect 2010
MISUMI USA Unveils New Configurable Components at 2010 Design & Manufacturing Midwest Show
PARTsolutions CEO to Keynote American Society of Engineering Education Mid-Year Conference
Delcam to launch Japanese CAM for SolidWorks at JIMTOF
SoftInWay to Present a New Approach to Multistage Centrifugal Compressor Design during the 39th Turbomachinery Symposium
Delcam CRISPIN to launch more productive footwear CADCAM at SIMAC
Delcam - Issue 47a
You can find the full MCADCafe event calendar here.
To read more news, click here.
-- Jeff Rowe, MCADCafe.com Contributing Editor.