It's 2011 and not all computer users need a workstation-class machine, but many truly do, especially with graphics-oriented applications, such as AutoCAD, SolidWorks, and Photoshop. However, high-powered workstations for graphics usually come with a price premium, so you can really pay a relatively high price for higher levels of performance. There are exceptions, however, and the HP Z210 CMT (Convertible Mini Tower) desktop workstation offers the best of both worlds – reasonable performance at a reasonable price.
The HP Z210 Workstation
I’d classify the HP Z210 as an entry-level machine that provides an introduction to desktop engineering workstations. Its small footprint and profile are not exactly aesthetically exciting, is a bit pricy for what you get (at least how our review machine was configured), but overall is a real performer compared with competition in this spec and price range. The HP Z210 workstation is designed for a professional, though not necessarily engineering-oriented environment. It’s got a lot of premium, server-grade components optimized for heavy workloads – although admittedly with some limitations that we discovered as we put the machine through its paces.
The HP Z210 we received for review came configured as follows:
CPU: Intel Xeon E3-1245, 3.30 GHz
RAM: 8GB (will handle up to 32 GB)
OS: 64-bit Windows 7 Professional
GPU: NVIDIA Quadro 2000
Display: HP ZR22w
With the advent and notoriety Intel's Core i7, why consider a Xeon processor? Since Xeon processors are generally intended for use in servers, they tend to run cooler and at lower voltages than the Core i7 CPUs. In other words, Xeon-based machines are designed for continuous use over long periods of time. The performance hit, though, could be an issue, and we’ll address that a bit later.
The Nvidia Quadro 2000 graphics card is part of a product line that is designed specifically to work on a continuous basis. Some applications, such as SolidWorks and Inventor are also optimized to work with Nvidia's Quadro cards, we found that large assemblies, advanced rendering, and some types of simulation bogged the system down compared with some other recently reviewed systems, but couldn’t determine if it was because of the CPU, GPU, or combination of the two.
With no tools required, a green latch on the side of the case provides easy access to the HP Z210's interior that contains three 5.25-inch drive bays, one occupied by the DVD burner and another by the card reader. There are three hard-drive bays, one occupied by the system’s hard drive.
However, a couple of concerns once inside the case. First, is the possible cooling issue because of too few cooling fans. There was one for the power supply, but only one other one for all other cooling. I think an overheating problem could easily arise due to air blockage and heat generation with additional cards and/or hard drives. Second, the internal wiring seemed a little haphazard and unwieldly with loose wires that I felt should have been tie-wrapped together to minimize the possibility of disconnecting or damaging when installing additional components in the chassis.
On the other hand, the sheer number of ports on the Z210 is amazing. For starters, it has a 22-in-one media card reader that can handle practically any data-holding card or other device on the market today. It has nine USB 2.0 ports, including three in front — 10 if you include the one on the media card reader, including two USB 3.0 ports on the back side.
Behind the scenes, but an integral part of the overall Z210 are the system software applications that come pre-installed on it – namely, the HP Performance Advisor and Power Assistant. Performance Advisor provides a lot of useful information and tools regarding the machine. It lists component changes, provides details on driver versions, as well as CPU and memory utilization – all handy information to know if and when you need it. The Power Assistant shows you much power the HP Z210 is using, along with estimates of its operating costs and carbon footprint. With this information, you can adjust how the system operates to minimize energy usage.
Pricing for the HP Z210 line starts at $659, and the model we reviewed was priced at $2,725 ($2,316 with 15% off using eCoupon) (as of 7/5/2011). All in all, a pretty solid value for a workstation of this type.
Just about every company has a couple users who need a little extra computing horsepower than is available in a generic desktop computer where a standard desktop PC might be perfectly suitable. However, heavy graphics and especially 3D can tax a standard PC fine beyond its limitations. For these types of applications and users, seriously consider a workstation. Even in 2011, workstations aren’t a major requirement for everyone. But, if you need a powerful PC to work with graphics and 3D tasks, and willing to pay a bit extra for optimized hardware for these types of tasks, and although it’s not perfect, the HP Z210 CMT is worthy of consideration.
Hewlett Packard Z210 Desktop Workstation
Pluses: Small form factor; internal accessibility; easily upgradeable; system management software.
Minuses: Few cooling fans; sluggish with some 2D and 3D applications (large assemblies, complex surfaces, and simulation).
Price (as supplied): $2,725 ($2,316 with 15% off using eCoupon). Prices start at $659.
Overall Grade: B
Contact: HP Z210 CMT Workstation
The Week’s Top 5
At MCADCafé we track many things, including the stories that have attracted the most interest from our subscribers. Below are the five news items that were the most viewed during last week.
CIMdata Publishes “Overcoming the Barriers Imposed by Geometry”
CIMdata announced a new paper detailing the use of SpaceClaim Engineer as a tool to prepare CAD model geometry for finite element meshing prior to analysis. “Overcoming the Barriers Imposed by Geometry” explores the issues that CAE analysts face due to the burden of poor quality and over-detailed geometric models in their attempts to produce timely simulation results. In order to properly mesh models for finite element analysis, topological inaccuracies such as surface gaps and small sliver surfaces in the geometry must first be corrected. The analyst must then simplify the model by de-featuring the geometric detail by removing things such as small holes, slots, and rounds that design has added for final manufacturing. The paper describes these time-consuming issues and relates the experiences of three different CAE analysts who have turned to SpaceClaim Engineer.
EOS And EADS Collaborate On Direct Metal Laser Sintering Technology
EOS, a manufacturer of laser-sintering systems, in collaboration with EADS Innovation Works (IW), has started work on a study to understand the potential of the Direct Metal Laser-sintering (DMLS) process to generate savings in the use of energy and raw materials. This will help to develop a new range of manufacturing technologies that will integrate sustainability relevant aspects into products and product manufacturing. By capitalizing on the benefits the DMLS process offers, including the net-shape technology to generate weight-reduced structures, along with the low use of raw materials, DMLS technology has great potential to contribute to sustainable development in manufacturing. A previous study conducted by EADS IW showed that although the use of energy during the manufacturing phase could not compare with conventional manufacturing processes, energy consumption during the use-phase of aircraft components dropped significantly. Indeed the DMLS technology unlocks structural optimization, leading to weight reduction of the components, and thus fuel and CO2 emissions reduction.
Geometric implements large scale desktop virtualization with NetApp, Cisco and Citrix technologies
Geometric Limited announced a large scale desktop virtualization implementation based on the Virtualization Experience Infrastructure (VXI) architecture with Cisco, NetApp and Citrix technologies. VXI is a service-optimized desktop virtualization platform that can deliver any application to any device in any workplace environment, support a rich user experience, and provide IT with additional security and control. The deployment will allow Geometric employees to access their server-hosted virtual desktop from anywhere and from a broad range of devices, with the cloud infrastructure also helping to drive business productivity and reduced operating costs.
ROMER Rolls Out the New CMS108 Inspection and Reverse Engineering Solution
ROMER Inc. announced the launch of CMS108, a high-precision, non-contact laser scanner available for its portable coordinate measuring machines. The newest option in ROMER’s laser scanning portfolio, the CMS108 is the most adaptable and adept at scanning a wide range of materials with enhanced sensitivity to color and surface finishes. Its improved accuracy makes it attractive for inspection and reverse engineering applications where laser scanners have been unable to meet tight tolerances. The CMS108 mounts with a kinematic joint to the seven-axis ROMER portable CMMs, which include the Absolute Arm SE and the Infinite 2.0 SC Arm. The CMS108 is the most precise laser scanner offered by ROMER with an accuracy of 20 microns, which is a 16% gain in accuracy over previous scanning solutions. In addition, the device was engineered for applications with a wide variety of color and surface finishes. Flying dot technology allows the laser scanner to rapidly detect changes in color and surfaces via their reflectivity. An operator can scan traditionally difficult finishes, including shiny and mirrored surfaces, without making manual exposure adjustments. The laser scanner can transition from matte to shiny features without additional calibration. With 3 different line widths and differing point densities, the CMS108 is able to perform inspection routines on small intricate parts and large surfaces. The CMS108 is currently available for the seven-axis Absolute Arm SE with measuring ranges of 2.0 to 4.5 meters. The sensor can also be added as an upgrade to the seven-axis Infinite 2.0 SC Arm.
Made-in-China CAD Software Breaks Unfavorable Stereotype
starCAD has investigated supply and demand of local CAD market in Austria, Poland, and Italy, and discovered that the negative stereotype concerning products made in China has not influenced the opinion of GstarCAD distributors and users. This conclusion is confirmed by the user feedback from those who attended GstarCAD showcases at Feicon Batimat 2011 and Tektonica 2011. People may be skeptical about "made-in-China" products, but there is no denying that with its 1.3 billion China definitely has no lack of brain power. GstarCAD team employed part of this amazing brain power to create its full-featured, IntelliCAD-based software. While attending, hosting and participating in a number of IT events and meetings with partners all around the world, the company was pleased to discover that those who had hands-on experience with GstarCAD software are far from applying the common stereotype to it. On the contrary, the program has earned a good reputation and popularity. GstarCAD seems to be changing the global perception of the Chinese software in general.
Jeffrey Rowe is the editor of MCADCafé and MCAD Weekly Review. He can be reached at Email Contact or 719.221.1867.
Hardware Review: HP Z210 CMT Desktop Workstation
Product and Company News
North American PLM Software Market to Grow over the Period of 2010-2014 says New Report
Helicopter Designs Take Flight With Autodesk Software
Luxology Ships Model Bashing Kit for modo 501
Bologna Court inhibits Versata from using registered trademark “Think3”
PTC Announces Strong Q3 Results and FY’11 Guidance
MLC CAD Systems Helps Custom Motorcycle Parts Maker Launch Successful Business by Mastering CNC Programming with Mastercam
ToleranceCalc plug-in from GEOMATE certified for Autodesk Inventor 2012
Dassault Systèmes Reports New Licenses Revenue Growth of 36% in Q2
Razorleaf Acquires Office2PDM From Extensible CAD
VISTAGY Best-in-Class Composites Survey Reveals 44% of Composite Engineering Firms Lack Expertise to Design for Manufacturability
FISHER/UNITECH Announces Grand Opening of Cincinnati, Ohio Office
Delcam launches multi-lingual CAD learning zone
Add Speed and Flexibility with Direct Modeling
Spatial Releases ACIS and 3D InterOp R22, Increasing the Depth of Application Capabilities
Rapid Prototyping Creates Roadworthy Concept Parts
OPTIS announces joint development with AMD for professional graphics technology in physics-based rendering solutions
OPTIS announces joint development with AMD for professional graphics technology in physics-based rendering solutions
MKS Integrity, a PTC Product, Certified for ISO 26262 by TÜV SÜD Automotive
Arena Closes Second Quarter With a 44% Increase in New Customers
Gerber Technology Continues to Grow YuniquePLM™ Team
Aras Announcement - Anautics Joins Aras Partner Program
Siemens U.S. Sales Up 15% and Orders Intake Up 6% in 3rd Quarter 2011
NKK Switches Increases Sales by Adding PARTsolutions' 3D Part Catalogs to Distributor Websites
First Online, Co-Created Military Vehicle Delivered Through Collaboration of Local Motors, Dassault Systèmes and Over 12,000 Community Members
Curriculum Development Division of Rand Worldwide Reaches Milestone Anniversary
Delcam reseller Les Technologies offers face-to-face and online CAM updates
Rapidform 3D Scanning Software Sales Continue Growth With Outstanding H1 2011 Results
Geometric declares revenues of Rs. 1,726.89 Mn; a rise of 27.5% Y-o-Y
Actify Announces SpinFire 10.0
[acronym] Magazine Launches the First Ever Public Sector CAD Awards
ANSYS & Apache Receive Early Termination of Hart-Scott-Rodino Waiting Period for Proposed Merger
Delcam Italia appoints Italy’s largest SolidWorks dealer as DFS reseller
Cimatron's Q2 2011 Results Release Scheduled
Solid Edge - Design Better: Get the Edge
SolidWorks 3DCAD reseller Progression Technologies opens Austin office
Research and Markets: Global Computational Fluid Dynamics Market 2010-2014 - Decreasing License Costs Encouraging Adoption of Computational Fluid Dynamics Software
Integware's Out-of-the-Box PLM Offers Unrivaled High-Speed, Low-Cost, Zero Customization ENOVIA Implementations
Research and Markets: The Asia Pacific (APAC) Computational Fluid Dynamics (CFD) Software Market to Grow over the Period of 2010-2014
Accelerating Push Into Mid-Market, Invention Machine Announces New Reseller Agreement With TriStar
Related MCAD News
CES Selector 2012 AIDS responSE to cost, supply, and ENVIRONMENTAL issues in manufacturing enterprises
Cloud Begins to Draw Blueprint in Design - Research Report on Adobe Systems Incorporated and Autodesk, Inc.
Océ publishes 2nd quarter 2011 results
Intergraph CADWorx Reinstatement Program Offers Deep Discounts
Sirona, Cadent, envisionTEC Lead Digital Dental Technology Sales in $11 Billion Dental Prosthetics and CAD/CAM Market
U.S. Industrial Manufacturing Projects Under Construction Worth $54.5 Billion, an Industrial Info News Alert
WorkNC Dental and Roland run a Dental CADCAM workshop for Spanish prosthetists (SESCOI)
Hagerman & Company Earns Autodesk Consulting Specialization
Dell Opens Solution Center in Northern Virginia
STIHL Hosts Manufacturing Camp for Students
Delcam demonstrates its CNC sign-making software
Research and Markets: CAD/CAM Dental Systems Market Outlook in BRICS (Brazil, Russia, India, China, South Africa) to 2017
Roland DGA Strengthens Marketing and Product Management Organization
Pyron Solar Announces Dr. Duncan Earl as CTO and Joe Bentley as Chief Engineer
Delcam adds more aerospace expertise to North America support team
New PartMaker Version 2012 to be Previewed at South-tec
DCS Vice President to Speak on Applying Dimensional Engineering Measurement Data to Improve the Engineering Process; Donald Jasurda Will Be Featured Presenter to More Than 700 CMS Professionals
Delcam’s new machining software to debut at TCT/Interplas
SURFCAM to Showcase at IMX 2011
PTC to Speak at 2 Investor Conferences in August
Geometric to showcase ‘From Orders to Parts’ with CAMWorks 2011 at imX 2011
CERN to host Product Lifecycle Management Conference
New PartMaker Version 2012 to be Previewed at EMO
Webinar: Interoperability with Space Claim - August 10, 2011 - Register Now!
Delcam plans new software releases at imX
Product Analytics On-Demand Webcast Series - presented by industry experts, analysts and PTC leaders. Optimize product performance across every dimension
New PartMaker Version 2012 to be Previewed at imX
Delcam to hold update seminars for PowerINSPECT inspection software
ANSYS CEO to Present at Canaccord Genuity Growth Conference
Experience the Benefits of Spring Technologies? Digital Workshop® at imX 2011
Sescoi hosts a reception for Japanese MPs and a press conference in Tokyo
Delcam reseller Trimech to host feature-based machining webinars
Delcam to launch new machining options in PowerMILL at EMO
SoftInWay introduces a free webinar “Comprehensive Introduction to SoftInWay: AxSTREAM, Consulting, Fundamentals and Design Training Courses”
SAMTECH announces SAMTECH Conferences 2011
Delcam to be only CAM sponsor of DS SolidWorks Reseller Conference
Xisis Partner with SpaceClaim, to take the World’s Fastest Solid Modeler to UK Engineering
FEA Journal July 2011
You can find the full MCADCafe event calendar here.
To read more news, click here.
-- Jeff Rowe, MCADCafe.com Contributing Editor.